Q170226E01.pdf - 第95页
RH5 4.1 Inspection Check List SERVICE MANUAL 4.1−12 DA3SEC−80−020−B0 4.1.10 Anvil Unit (T op) U Fixed/movable blade (1) Pin pivot (2) Oiling hole (1) Pin pivot Guide pin Inspection Period Inspection item x Make sure that…
4.1 Inspection Check List
SERVICE MANUAL
RH5
4.1−11
DA3SEC−80−020−B0
4.1.9 Component Feeder
[1] LM guide
[2] Grease nipple
Inspection
Period Inspection item
Daily
x Make sure that feeder movement is smooth.
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
[1] LM guide
Moder−
Monthly
x Remove all dirt adhering on the
[2] Grease nipple
Grease
Moder
ate
amount
3
months
Remove
all
dirt
adhering
on
the
surface completely and apply a
thin coat of grease.
RH5
4.1 Inspection Check List
SERVICE MANUAL
4.1−12
DA3SEC−80−020−B0
4.1.10 Anvil Unit (Top)
U Fixed/movable blade
(1) Pin pivot
(2) Oiling hole
(1) Pin pivot
Guide pin
Inspection
Period Inspection item
x Make sure that spiral cord is not damaged.
Daily x Make sure that cut & clinch claw is not worn or damaged.
x Make sure that lead guide pin is not worn or damaged.
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
(1) Pin pivot
Machine
Moder−
ate
x In
j
ect moderate amount o
f
(2) Oiling hole
Machine
oil
a
t
e
amount
Inject
moderate
amount
of
machine oil into the oiling hole.
Fixed blade
Daily
x Apply machine oil into the dust
cover with the camshaft stopped
at 200 to 320q in manual
operation.
Movable
blade
x Make sure that lubricant does not
come in contact.
4.1 Inspection Check List
SERVICE MANUAL
RH5
4.1−13
DA3SEC−80−020−B0
4.1.11 Anvil Unit (Bottom)
Oil tank
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
(1) Oil tank
Machine
oil
Moder−
ate
amount
Monthly
x Inject machine oil if the amount of
oil is below the lower limit
(EMPTY).