Q170226E01.pdf - 第13页
RH5 1.1 Use of This Manual SERVICE MANUAL 1.1−2 DA3SEC−81−010−B0 Portions Listed: Control number 1.1.4 Handling of Revisions and Additions N The pages reflecting revisions and additions to this manual resulting from spec…
1.1 Use of This Manual
SERVICE MANUAL
RH5
1.1−1
DA3SEC−81−010−B0
1.1 Use of This Manual
DA3SEC−81−010−B0
Sentence No.
1.1.1 Concerning Secrecy
N This manual contains information which, if leaked to outside parties, might cause harm to business of
Panasonic Factory Solution and/or seriously affect safety conditions.
N For that reason, we would ask you strictly not to distribute any information in this manual to customers.
1.1.2 Handling of This Manual
N This manual is prepared only for service engineers in charge of products of Panasonic Factory Solution
at branch offices.
N This manual is based on standard machine specifications. Therefore, it is recommended to refer to its
operating instructions, parts list, writing diagram of control system.
N More technical information and service hints will be added when necessary.
N Some drawings or illustrations are subject to change due to the change of specifications, etc.
1.1.3 Control Numbers
N Control numbers are put to this Service Manual section by section.
Control Number Explanation
Record of revisions due to
change of design.
Record of revisions on the level of corrections
of text or spelling
Section number
Chapter number
Revisions history
These codes are updated when the
manual is revised.
Example:
E
Stands for document. Fixed at D. Indicated to distinguish
the manual from drawings or diagrams.
Document type
M: Service Manual
Model number
Language:
J: Japanese E: English
Identifies the relevant regulations of the destination of the equipment.
C (Common to all regions), E (EU), P (Regions other than Japan and
EU nations)
A
S
RH5
1.1 Use of This Manual
SERVICE MANUAL
1.1−2
DA3SEC−81−010−B0
Portions Listed:
Control number
1.1.4 Handling of Revisions and Additions
N The pages reflecting revisions and additions to this manual resulting from specification changes will be sent
to you each time. We would ask you to replace old pages with new ones or add the new pages based on
manual filing system.
For Revisions
N Only the sections whose control numbers have been changed will be sent. Replace the current version
with the revised version.
For Additions
N Pages of added sections will be provided. What have been added will be separately indicated.
1.1 Use of This Manual
SERVICE MANUAL
RH5
1.1−3
DA3SEC−81−010−B0
1.1.5 Conventions Used
Chapter Cover
N Chapter cover is assigned to each chapter to introduce the topics discussed in the chapter.
N It contains applicable model, document name and the title of the chapter.
Applicable model and
document name
Indicates the topics included or notes
concerned.
Identifies the title of the chapter.