Q170226E01.pdf - 第32页
1.3 On Safety SERVICE MANUAL RH5 1.3−1 DA3SEC−81−080−B0 1.3 On Safety DA3SEC−81−080−B0 Sentence No. 1.3.1 Safety Precautions T o guarantee the safety of the workers, the machine is designed and installed in conformity wi…
RH5
1.2 Safety Precautions
SERVICE MANUAL
1.2−14
DA3SEC−81−020−A0
= MEMO =
1.3 On Safety
SERVICE MANUAL
RH5
1.3−1
DA3SEC−81−080−B0
1.3 On Safety
DA3SEC−81−080−B0
Sentence No.
1.3.1 Safety Precautions
To guarantee the safety of the workers, the machine is designed and installed in conformity with the
safety standards and requirements of the country where it is delivered.
The customer of the machine is responsible for observing the safety laws and regulation of his/her
country.
The customer is also responsible for installing the necessary safety devices to protect the machine
operator and other personnel.
The machine must be operated and maintained by the qualified personnel who is well
trained, and well acquainted with the machine and its functions described in the Operation Manual,
Maintenance Manual and Wiring Diagram.
Safety Precaution
“Maintenance at non−electrical parts in electrical installation cabinets must be carried out by electrical
engineers only!”
List of Machine Documents
Machine documents with explanations concerning service and maintenance work, which shall be carried
out by specialist engineers only.
N Operating Instructions
N Wiring Diagrams
N Parts List
N Operating Instructions for Optional Equipment
1.3.2 Safe Working Procedures
While carrying out prescribed operations, observe the safe working procedures in order to prevent
accident or machine damage.
Never modify, neglect nor change the safety devices and the safety circuits.
Normal operation
Be sure to close all the safety covers when performing normal operation in automatic, semiautomatic and
manual modes respectively.
Component Supply/Model Changeover
Opening the cover other than the tray stocker activates the safety sensor, thus causing the whole
machine or operation part to stop completely.
Be sure to turn the power OFF before changing production models.
Always open the cover of the tray stocker when feeding components.
While the tray is replacing, the machine locks the tray stocker. In such a case, wait until the lock has
been released.
RH5
1.3 On Safety
SERVICE MANUAL
1.3−2
DA3SEC−81−080−B0
1.3.3 How to Deal with the Operation Troubles
Any troubles occurred during machine operation may cause various hazardous conditions besides
troubles on normal operations.
This is because the necessity of manual operation may arise when dealing with the troubles.
It is requested that this type of repair/adjustment be done only by the trained, skilled personnel who are
conversant in the possible accidents that may occur in each point as well as the whole of the installation.