Q170226E01.pdf - 第97页
RH5 4.1 Inspection Check List SERVICE MANUAL 4.1−14 DA3SEC−80−020−B0 4.1.12 Cut W aste Bottle and T ape W aste Receptacle Filter Red area Pressure gauge Air blow Screw Filter Inspection Period Inspection item x Dispose o…
4.1 Inspection Check List
SERVICE MANUAL
RH5
4.1−13
DA3SEC−80−020−B0
4.1.11 Anvil Unit (Bottom)
Oil tank
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
(1) Oil tank
Machine
oil
Moder−
ate
amount
Monthly
x Inject machine oil if the amount of
oil is below the lower limit
(EMPTY).
RH5
4.1 Inspection Check List
SERVICE MANUAL
4.1−14
DA3SEC−80−020−B0
4.1.12 Cut Waste Bottle and Tape Waste Receptacle
Filter
Red area
Pressure gauge
Air blow
Screw
Filter
Inspection
Period Inspection item
x Dispose of the lead cut waste and tape waste.
Daily
x Clean the filter of the tape waste receptacle using air blow. (Replace it if
damaged.)
x Make sure that the black needle of the pressure gauge is out of the red area.
If it is within the red area, clean up the anvil and hose to eliminate any clogging.
Weekly
x Clean the filter of the cut waste bottle using air blow. (Replace it if damaged.)
4.1 Inspection Check List
SERVICE MANUAL
RH5
4.1−15
DA3SEC−80−020−B0
4.1.13 Exhaust Cleaner
Exhaust cleaner
Turn this screw to drain the oil.
(When doing this, be sure to put a plate
below.)
Inspection
Period Inspection item
Daily
x Drain the oil out of the exhaust cleaner.