Q170226E01.pdf - 第233页

Lamp connector Inverter board M3 flat head machine screw Lamp replacement lid RH5 5.38 B a c k light Replacement on Main Control Panel SERVICE MANUAL 5.38−4 DA3SEC−83−9W0−A0 7. Insert the lamp connector into the inverter…

100%1 / 392
Lamp
5.38 Backlight Replacement on Main Control Panel
SERVICE MANUAL
RH5
5.38−3
DA3SEC−83−9W0−A0
5. Remove the lamp slowly.
6. Insert a new lamp with the light−emitting
surface facing to the front of the machine.
At this time, ensure that the lamp is inserted
completely until the lamp lock screw is
snapped on.
Lamp connector
Inverter board
M3 flat head machine screw
Lamp replacement lid
RH5
5.38 Backlight Replacement on Main Control Panel
SERVICE MANUAL
5.38−4
DA3SEC−83−9W0−A0
7. Insert the lamp connector into the inverter
board firmly.
8. Reattach the lamp replacement lid into
position with the screws.
M3 flat head machine screw (x 3)
SERVICE MANUAL
RH5
6.0−1
6ダミー(Sectionのレベル1)
6.0ダミー(Sectionのレベル2)