Q170226E01.pdf - 第3页

This Service Manual is designed for experienced service engineers only and is not

designed for use by the general public.

It does not contain warnings or cautions to advise non−technical individuals of

potential dangers in attempting to service a product.

Products powered by electricity should be serviced or repaired only by experienced

professional technicians.

Any attempt to service or repair the product or products dealt with in this service

information by anyone else could result in serious injury or death.

WARNING

SERVICE MANUAL

RH5

DA3SEC−02−020−B0

Sentence No.

Table of Contents

1. INTRODUCTION 1.0−2...............................

1.1 Use of This Manual 1.1−1..........................................

1.1.1 Concerning Secrecy 1.1−1..................................................

1.1.2 Handling of This Manual 1.1−1...............................................

1.1.3 Control Numbers 1.1−1.....................................................

1.1.4 Handling of Revisions and Additions 1.1−2....................................

1.1.5 Conventions Used 1.1−3....................................................

1.1.6 Operating Procedures 1.1−5.................................................

1.2 Safety Precautions 1.2−1...........................................

1.3 On Safety 1.3−1..................................................

1.3.1 Safety Precautions 1.3−1...................................................

1.3.2 Safe Working Procedures 1.3−1..............................................

1.3.3 How to Deal with the Operation Troubles 1.3−2.................................

1.4 Lubrication Oil 1.4−1...............................................

1.4.1 Recommended Lubricants 1.4−1.............................................

1.4.2 Grease Gun Unit 1.4−2.....................................................

2. GENERAL INFORMATION 2.0−2.......................

2.1 Insertion Process and Driving Transmission Flow 2.1−1................

2.2 Electronic Component Insertion and Related Operations 2.2−1..........

2.3 Sensor Layout 2.3−1..............................................

2.4 Control Configuration 2.4−1........................................

2.4.1 Panadac−791 Board Configuration 2.4−1......................................

2.4.2 Control System Diagrams 2.4−3..............................................

2.5 Cycle Timer Timing Chart 2.5−1.....................................

2.6 Timing Chart 2.6−1................................................

2.7 Cam Arrangement 2.7−1...........................................

2.8 Speed Controller and Solenoid Valves 2.8−1..........................

2.9 Lock Levers and Cylinder Arrangement 2.9−1.........................

2.10 Drive Lever Arrangement 2.10−1....................................

2.11 Cam Follower Arrangement 2.11−1..................................

2.12 Pneumatic Circuit Diagram 2.12−1..................................

2.12.1 Pneumatic Circuit Diagram (NM−8244A/B/C) 2.12−1............................

2.12.2 Pneumatic Circuit Diagram (NM−8245A/B/C) 2.12−2............................