Q170226E01.pdf - 第23页

RH5 1.2 Safety Precautions SERVICE MANUAL 1.2−6 DA3SEC−81−020−A0 Make sure the W ARNING labels of the equipment are displayed easy−to−read. Smeared labels or any obstacle in front of the labels may prevent them from bein…

100%1 / 392
1.2 Safety Precautions
SERVICE MANUAL
RH5
1.2−5
DA3SEC−81−020−A0
Do not use equipment which
generate electromagnetic
noise.
The machine may malfunction
due to electromagnetic noise.
Prohibition
Take care when handling the cut
waste bottle.
Rough handling could damage
the bottle, resulting in
personal injury.
Do not pull out the card within
controller with power ON.
The machine may malfunction
or run out of control, causing
personal injury.
Prohibition
Do not turn OFF the controller
power switch during
maintenance, repair or automatic
operation.
The table may run out of
control, causing personal
injury.
Prohibition
CAUTION
Turn OFF the sub−control panel
switches after performing
maintenance.
The machine will move when
changing operation mode
over. It may cause personal
injury.
NEVER touch sensors directly.
Machine can catch your hands
and fingers and result in
personal injury.
KEEP hands and fingers away
when the cover opens and
closes.
The cover can catch your
hands and fingers and result
in personal injury.
BEWARE of high temperature
when replacing light bulbs.
You may get burned by high
temperature.
Keep body
clear
No fingers
inside machine
Burn
RH5
1.2 Safety Precautions
SERVICE MANUAL
1.2−6
DA3SEC−81−020−A0
Make sure the WARNING labels
of the equipment are displayed
easy−to−read.
Smeared labels or any
obstacle in front of the labels
may prevent them from being
seen, causing accident.
Be careful not to get your
fingers caught while moving
X−Y table.
There is a fear of your fingers
being caught between upper
table and under table.
Beware of
fingers
Do not put things on top of the
equipment.
They may drop which could
cause personal injury.
Prohibition
Operators other than the
authorized person in charge
should not revise the system
program or data.
Incorrect system program or
data could cause unexpected
machine motion, resulting in
personal injury.
Do not shut off the air supply
during maintenance, repair or
automatic operation.
The machine could
malfunction, causing personal
injury.
Do not use an air gun to clean
the machine.
The lead cut waste may scatter
over equipment drive or electric
circuits, causing any
abnormality.
Prohibition
Turn main power switch (Control
panel) OFF before entering Z
axis guard.
Unexpected machine motion
could cause personal injury.
Do not leave tools inside
machine.
Tools left inside the machine
could contact the drive units
or electric parts, causing
damage to the equipment.
CAUTION
Prohibition
Prohibition
Prohibition
1.2 Safety Precautions
SERVICE MANUAL
RH5
1.2−7
DA3SEC−81−020−A0
Pay attention to the corners or
electric parts when
disassembling, assembling or
adjusting machine parts.
There is the possibility of
personal injury or electric
shock.
Replace worn parts as soon as
possible.
Use of worn parts could cause
unusual machine motion,
leading to personal injury.
Operators other than the
authorized person in charge
should not change the individual
machine data.
Erroneous data setting could
cause malfunction, resulting in
personal injury or damage to
the equipment.
Read the Service Manual for
proper servicing.
Mishandling could cause
accident, leading to personal
injury, electric shock or fire.
Do not climb on the
equipment.
There is the possibility of
personal injury.
Prohibition
Encourage customers to
conduct periodical inspection
properly.
Improper servicing could
cause malfunction, further
leading to personal injury,
electric shock or fire.
Do not turn OFF the key switch
of power supply during
operation.
The machine could move
abruptly casing personal
injury.
Power supply, frequency,
capacity and air supply must
conform to the specification.
Unless conformed to the
specification, there is the
possibility of personal injury or
electric shock due to malfunction
or leakage.
CAUTION
Prohibition
Prohibition