Q170226E01.pdf - 第28页
1.2 Safety Precautions SERVICE MANUAL RH5 1.2−1 1 DA3SEC−81−020−A0 Never touch sensors directly with your hands. Instead, use a piece of paper , tweezers, etc. Do Not T ouch Sensors Directly! CAUTION CAUTION NEVER touch …
RH5
1.2 Safety Precautions
SERVICE MANUAL
1.2−10
DA3SEC−81−020−A0
WARNING WARNING
If possible to perform maintenance without
machine operation, turn the power OFF to
ensure safety.
Power OFF!
Always shut OFF the machine
power switch before performing
maintenance.
Improper machine operation
could result in personal injury.
When the machine stops for an error during
automatic operation, depending on the
circumstances, it may restart automatically
after the cause of the error is removed.
Therefore, never place your hands in the
machine when it is in the AUTO mode. For
example, when the loader PCB sensor does
not detect PCB, and the machine stops, it will
restart automatically as soon as a new PCB
is fed.
No Hands in Machine
PCB sensor
NEVER place your hands and
fingers inside the machine during
operating.
Machine could catch your
hands and fingers and result
in personal injury.
Keep body
clear
1.2 Safety Precautions
SERVICE MANUAL
RH5
1.2−11
DA3SEC−81−020−A0
Never touch sensors directly with your
hands. Instead, use a piece of paper,
tweezers, etc.
Do Not Touch Sensors Directly!
CAUTION
CAUTION
NEVER touch sensors directly.
Machine can catch your hands
and fingers and result in
personal injury.
Keep body
clear
Watch fingers while closing the cover.
The cover can catch your hands and
fingers and result in personal injury.
No fingers
inside
machine
KEEP hands and fingers away
when the cover opens and closes.
The cover can catch your
hands and fingers and result
in personal injury.
No fingers
inside
machine
RH5
1.2 Safety Precautions
SERVICE MANUAL
1.2−12
DA3SEC−81−020−A0
Safety System of the Machine
For the safety of the operation, the machine is equipped with the following safety system.
Please read the following explanations carefully, and understand the safety system well before operating the
machine.
1. Emergency Stop
In case any emergency is felt, or any abnormal operation is observed, hit the emergency stop switch.
The machine will stop instantly.
Emergency stop switch
Emergency stop switch
Emergency stop switch
Emergency stop switch
NM−8244A/B/C
NM−8245A/B/C
=HINT=
Releasing emergency stop switch does not make the machine resume its operation.
Follow the procedure of ‘Operation manual/Operation/Restart after Emergency Stop’ to restart
operation.