Q170226E01.pdf - 第92页
4.1 Inspection Check List SERVICE MANUAL RH5 4.1−9 DA3SEC−80−020−B0 Inspection Period Inspection item Daily x Make sure that slide rod feeds component smoothly . D a il y x Make sure that slide rod top spring is secured …
RH5
4.1 Inspection Check List
SERVICE MANUAL
4.1−8
DA3SEC−80−020−B0
4.1.7 Tape Feed Unit
[1] Rod end
(2) Slide rod
Spring
Stopper bolt
Tape Feed Unit
Feed claw
Parts cassette
Guide
Cut Waste Chute
4.1 Inspection Check List
SERVICE MANUAL
RH5
4.1−9
DA3SEC−80−020−B0
Inspection
Period Inspection item
Daily
x Make sure that slide rod feeds component smoothly.
D
a
il
y
x Make sure that slide rod top spring is secured completely.
Monthly
x Check the feed claw of the parts cassette and remove any cut waste of the
base tape.
Daily
x Make sure that cut waste chute guide is not bent.
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
[1] Rod end Grease
Moder−
ate
amount
Monthly
x Remove all dirt adhering on the
surface completely and apply a
thin coat of grease.
(2) Slide rod
Machine
oil
1−2
drops
2 weeks
x Apply 1 or 2 drops to slide rod.
RH5
4.1 Inspection Check List
SERVICE MANUAL
4.1−10
DA3SEC−80−020−B0
4.1.8 Cutter
[1] Link pivot
[2] Rod end
[2] Rod end
[1] Link pivot
Parts detection
sensor
Tape part exhaust
sensor
Inspection
Period Inspection item
x Make sure that lubricant or dust is not adhering on the parts detection sensor.
x Make sure that lubricant or dust is not adhering to the tape part exhaust sensor.
Daily x Make sure that lubricant or dust is not adhering to the blade of cutter.
x Make sure that cutter blades are not worn or damaged.
x Make sure that the cutter blades open/close smoothly.
Oiling
Part
number
Oiling point Oil type
Oil
volume
Period Lubrication method
[1] Link pivot
Grease
Moder−
ate
2 weeks
x Remove all dirt adhering on the
surface
completely
and
apply
a
[2] Rod end
G
rease
a
t
e
amount
Monthly
sur
f
ace comp
l
e
t
e
l
yan
d
app
l
ya
thin coat of grease.