RS-1R使用说明书.pdf - 第8页

vi 注意 1. 本装置在 ATX 电源中使用了电池，以保护停电时的生产程序等。为防止 ATX 内置电池老化，请勿在非通电状态下将本装置放置 6 个月以上。 ● 本装置以主断路器及总开关 ON 的状态为通电状态。

为了安全使用 RS-1 系列的注意事项

危险

1. 共面性传感器中使用了激光等级为 3B 的产品。

激光束会造成眼睛或皮肤损伤。

请不要直视激光束。并且，当接通装置的电源时，请绝对不要窥视共面性传感器

的

激光照射口。

2. 在维护模式下，即使安全罩为打开状态主轴也仍在低速动作，所以请绝对不要将

头或手等伸入可动范围内。

注意

为防止人身受伤，请勿在拆下安全盖（安全罩）、安全装置等状态下运行。

2. 为防止人身受伤，请务必小心，以免头发、衣服等被卷入传送带链。

此外，请勿戴手套。

3. 为防止人身受伤，维护时（注油、调整、日常检修），请切断电源。

4. 为防止人身受伤，请在电源线上使用漏电断路器。

安全盖（安全罩）

1. 开关安全盖（安全罩）时请注意下列事项。

・打开安全盖（安全罩）时要把盖（罩）向上开足直到面向左侧的锁定臂处于“上

锁”状态后，再放开手。

没有上锁就放开手时，盖（罩）有落下来的危险。

・关闭盖（罩）子时先解开锁，再关闭盖（罩）子。

（请注意，解开锁时不要使盖（罩）子落下来导致受伤。）

・不要过渡增加盖（罩）子、手把等的负荷。

・如果 Head 单元位于主机装置后面，开关后侧安全盖（安全罩）时，可能会接触

到 X 轴单元。这时，请将 Head 单元移动到主机装置前面，再进行后侧安全盖（安

全罩）的开关。

注意

本装置的操作系统采用

Windows 7

（包括以太网通信功能）。

除安装提供的用于本装置的软件之外，加装其他软件，不保证正常运行。

对 SSD 内装入的文件进行转移、重命名、文件或文件夹的压缩、复制，也同样不

保证正常运行，敬请谅解。

●万一出现此种情况，可能需要更换新的

SSD

、丢失数据，务请格外注意。

注意

为保护操作系统，使用了

Enhanced Write Filter(EWF)

组件，进行了

盘

ROM

化。

1. 请勿在 C 盘保存文件。

把文件保存在 ROM 化后的 C 盘，会仿真占用主存储器。

因而，把文件存在 C 盘里时，会增加主存储器的使用量，压迫系统。

反复保存后可能造成内存不足，显示系统错误，可能需要重启本设备。

2. 需要修改操作系统的信息时，必须进行 C 盘的更新操作。

操作方法请参见使用说明书「1-10 更新 C 盘的操作」。

需要修改操作系统信息的操作是指下列事项：

・RS-1 系列系统软件的版本升级

・添加打印机

・设置网络（IP 地址、工作组等）

・添加用户

・变更资源管理器的设置

●

要变更操作系统信息时，在执行

盘的更新操作后，需要重启一次本装置。

注意

本装置的

盘可用于安装软件或保存数据，但容量有限。

1. 请确保 D 盘的可用空间。

D 盘的可用空间请确保 500MB 以上。

可用空间不足 500MB 时，请删除无用的文件(旧版本的主机软件、Log 文件、无

用的生产程序等），以确保可用空间。

● 在可用空间不足的状态下使用时，可能发生应用软件错误或文件 I/O 错误，

导致软件运行不稳定，无法进行正常的动作。

注意

本装置在

ATX

电源中使用了电池，以保护停电时的生产程序等。

为防止 ATX 内置电池老化，请勿在非通电状态下将本装置放置 6 个月以上。

● 本装置以主断路器及总开关 ON 的状态为通电状态。

为了安全使用机器

第 1 部基本篇 ······························································································ 1-1

第 1 章装置概要 ···························································································· 1-1

1-1 本装置概要 ···································································································· 1-1

1-1-1 前言 ·············································································································· 1-1

1-1-2 特长 ·············································································································· 1-2

1-1-3 特性 ·············································································································· 1-4

1-1-4 系统构成 ········································································································ 1-5

1-1-5 缩写的说明 ····································································································· 1-7

1-1-6 本装置的构成 ·································································································· 1-8

1-2 本装置的构造 ······························································································· 1-10

1-2-1 基板传送部分的构造 ······················································································· 1-10

1-2-2 元件供给部分的构成 ························································································ 1-11

1-2-3 Head 单元的构成···························································································· 1-14

1-2-4 ATC 单元（Auto Tool Changer）的构成 ······························································ 1-17

1-2-5 图像识别装置（VCS）的构造 ··········································································· 1-21

1-3 机械规格 ····································································································· 1-22

1-3-1 机械尺寸与重量 ····························································································· 1-22

1-3-2 贴片精度 ······································································································ 1-23

1-3-3 其他 ············································································································ 1-29

1-3-4 X, Y, Z, ZA, θ 轴的说明 ···················································································· 1-30

1-4 电气规格 ····································································································· 1-31

1-4-1 与外部装置的接口 ·························································································· 1-32

1-5 对象元件及元件包装方式 ················································································ 1-35

1-6 印刷基板规格 ······························································································· 1-44

1-7 定心系统 ····································································································· 1-48

1-8 基本操作 ····································································································· 1-53

1-8-1 画面构成示例 ································································································ 1-53

1-8-2 显示装置及输入装置 ······················································································· 1-54

1-8-3 操作方法 ······································································································ 1-56

1-8-4 菜单、功能按钮 ····························································································· 1-61

1-8-5 简易事项显示画面 ·························································································· 1-72

1-9 文件的操作 ·································································································· 1-74

1-9-1 新建 ············································································································ 1-74

1-9-2 打开（读入文件） ·························································································· 1-74

1-9-3 保存 ············································································································ 1-75

1-9-4 另存为 ········································································································· 1-75

1-9-5 文本文件输出 ································································································ 1-77

1-9-6 设备信息的取得和保存 ···················································································· 1-80

1-9-7 保存图像数据 ································································································ 1-89

1-9-8 生产程序初始文件夹 ······················································································· 1-90

1-9-9 文件管理 ······································································································ 1-91

1-9-10 硬件安全拆卸 ······························································································ 1-92

1-10 C 盘的更新操作 ··························································································· 1-93