XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第114页

7.2 Specification Data Administration Function (ESR0604a) The specification data administration function is used on XP machines to import and merge specification data. The specification data is a file which contains the …

7. Data Administration

7.1 System Data Backup and Recovery

(ESR0602a)

The system data can be backed up as a measure against system data crashes. Should

such a crash occur, the backed up system data can be used to perform a recovery.

• Proper data

• Language settings

• Vision processing data

• Calibration data

• User account information

• Touch panel calibration data

• Matrix compensation data

• Nozzle compensation data

• Device compensation data

• System data such as a specification data

Note: It is not possible to back up production programs, part data, or templates which created by

the user.

Procedure

1. At the [Main] screen, select [Maintenance B] then [Backup] to display the [Backup]

screen.

2. To create a backup system file, insert a floppy disk into the floppy disk drive, then

press [System] at the “Backup” side.

3. To perform a recovery, insert the floppy disk containing the backup system file,

then press [System] at the “Recovery” side.

Note: After restoring the system, turn off the main machine power and restart the machine. Do not

shut down the machine.

Part 2 Chapter 7 Data Administration

Edition 2.0 2-7-1 XP-142E System Reference

7.2 Specification Data Administration Function

(ESR0604a)

The specification data administration function is used on XP machines to import and

merge specification data. The specification data is a file which contains the specifications

for the nozzles and feeders being used. When new nozzles or feeders are added, the new

specification data for those items must be imported/merged.

Note: If using a Fuji Machine host system or MCS-X, complete the merge or import at the host or

MCS-X before transmission to the XP machine.

Import: A specification data file is imported and added to the specification data in the

machine.

Merge: Specification data created off the machine is merged with the specification

data in the machine, to create a single specification data file.

7.2.1 File Types Which Are Handled

Note: Other than imported data, file names differing from those listed above will not be accepted.

Only imported file names for data selected at the file selection screen will be accepted.

FUJINZL.DAT

FUJINZL.CFG

FUJIFDR.DAT

File selection available (IN_NZL.DAT etc.)

File selection available (IN_FDR.DAT etc.)

SKDEF.INI

Nozzle spec. data

Nozzle configuration data

Feeder spec. data

Nozzle data for import

Feeder data for import

Definition settings file

XP2S2220Ea

Part 2 Chapter 7 Data Administration

Edition 2.0 2-7-2 XP-142E System Reference

7.2.2 Opertion Procedure

Import

1. At the [Main] screen, select [Maintenance A] - [Specification Data Manager] to

display the [Specification Data Manager] dialog box.

2. Insert the floppy disk containing the data to be imported in the floppy disk drive,

then press the [Import] button.

3. Press [OK] at the floppy disk confirmation dialog box which displays.

Part 2 Chapter 7 Data Administration

Edition 2.0 2-7-3 XP-142E System Reference