XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第230页

1.2 OPERA TION _BrightLevelArrv – [Explanation] Not used [Default] 0 _TrayDetectMotion – [Explanation] Not used. [Default] 0 _GateMotionSwitch 0:1:2 O [Explanation] Placement settings 0: Use sequence data settings 1: Arc…

_ConvOutSensor 0:1 X

[Explanation] Conveyor-out station sensor specifications

0: Unsupported

1: Supported

[Default] 1

_BackupPlateSensor 0:1 X

[Explanation] Backup plate interference prevention sensor

0: Not supported

1: Supported

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-3 XP-142E System Reference

1.2 OPERATION

_BrightLevelArrv –

[Explanation] Not used

[Default] 0

_TrayDetectMotion –

[Explanation] Not used.

[Default] 0

_GateMotionSwitch 0:1:2 O

[Explanation] Placement settings

0: Use sequence data settings

1: Arch motion

2: Gate motion

[Default] 0

_DisposeWaitTime –

[Explanation] Not used.

[Default] 0

_TrayAbsorbTime –

[Explanation] Not used.

[Default] 0

_DisposeConvSide –

[Explanation] Not used.

[Default] 0

_ResetCylORTime –

[Explanation] Not used.

[Default] 0

_PlaceDownEndTimer X

[Explanation] Sets the down limit timer at placing operation (msec).

[Default] 0

_DeviceSetChkUse 0:1:2:3 O

[Explanation] Specifies the part resupply confirmation method.

0: Automatic part resupply

1, 2: Manual part resupply

(Using the machine information screen for parts out or missed pick-

up)

3: Manual part resupply

(Using the machine information screen for parts out, missed pick-up,

or vision processing error)

[Default] 3

_ConvErrTime 0:60000 X

[Explanation] Sets the next stage arrival confirmation timer (msec).

0: 10000 (msec)

The value 1000 is used for all settings below 1000 (msec).

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-4 XP-142E System Reference

_ConveyerMode 0:1:2 O

[Explanation] Specifies the conveyor mode

0: Same setting as 1.

1: Standard

(Acquire after main conveyor’s panel pass sensor switches on.)

2: Special (Acquire after unloading)

[Default] 1

_ConveyerPassMode 0:1 O

[Explanation] Specifies the conveyor pass mode

0: Normal pass mode (Clamped on main lifter)

1: No clamp mode (Not clamped on main lifter)

[Default] 0

_PickUpTimerSide1 –

[Explanation] Not used

[Default] 0

_PickUpTimerSide2 –

[Explanation] Not used.

[Default] 0

_PickVaccumStartTime –

[Explanation] Not used.

[Default] 0

_VacuumDesTime –

[Explanation] Not used.

[Default] 0

_VT130ImageProcTwice –

[Explanation] Not used.

[Default] 0

_TrayEjectCheck –

[Explanation] Not used.

[Default] 0

_DesStartTime –

[Explanation] Not used.

[Default] 0

_MultiImageNotDisp –

[Explanation] Not used.

[Default] 0

_ConvMtrSpeed X

[Explanation] Sets the panel conveyance speed (mm/sec)

[Default] 340 (“340” is also adopted if the setting is “0”)

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-5 XP-142E System Reference