XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第4页

About This Manual (ESR0004j) This manual contains important machine maintenance information for the operator. The manual content is intended for specialized technicians who are familiar with Surface Mount Technology (SMT…

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.

(ESR0002c)

About This Manual

(ESR0004j)

This manual contains important machine maintenance information for the operator.

The manual content is intended for specialized technicians who are familiar with Surface

Mount Technology (SMT).

Please read this manual carefully in order to ensure safe and efficient machine

maintenance.

Keep this manual close to hand when operating the machine.

Manual Structure

This manual consists of the following nine parts.

Safety Guidelines

Part 1 General

Part 2 Operation

Part 3 On-Machine Programming

Part 4 Creating Templates at the Machine (Vision Type 18)

Part 5 Commands

Part 6 Proper Data

Part 7 I/O Map

Part 8 Errors and Countermeasures

About This Manual

Edition 2.0 i XP-142E System Reference

Page Layout

Each page indicates the part number, chapter number and title, section title , manual

name, page number, and the edition number of the manual.

Part number

The part number to which each chapter belongs is shown on the header on each page.

Chapter number and title

The title of each chapter is shown in the header on each page. Each part may contain one

or more chapters.

Section title

Each chapter may be divided into several sections. The section number is composed of

the number of the chapter to which the section belongs, followed by a sequential number

for each section.

1. Basic Operation

(ESR02AB)

This chapter explains basic procedure of the machine operation. Ensure you are familiar with all the

parts of the machine, which have been described in Part 1, before attempting the procedures

described in this chapter. Most of the explanations start from the [Main] screen shown below.

1.1 Starting Up and Shutting Down the Machine

(ESR0201i)

1.1.1 Starting the Machine and Displaying the [Main] Screen

Although most of the explanations in this chapter start from the [Main] screen, this is not

the first screen that displays when the machine is started. Carry out the following

procedure to start the machine and display the [Main] screen.

Procedure

1. Start the host system connected to the machine.

2. Set the circuit breaker on the machine to the ON position.

3. Push the SYSTEM ON button to start the machine.

The machine boots up and the red [Logon] screen displays.

4. Pressing the [Operator] or [Password] fields displays a keyboard.

5. Using the displayed keyboard, enter the [Operator] (operator name) and

[Password], then press [Logon] to log on.

Part 2 Chapter 1 Basic Operation

Edition 2.0 2-1-1 XP-142E System Reference

Manual name

XP1S0002Ea

Body

Edition number

Page number

Section title

Chapter number and title

Part number

About This Manual

Edition 2.0 ii XP-142E System Reference