XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第192页

Part 3 Chapter 3 Editor Edition 2.0 3-3-37 XP-142E System Reference Setting Item Explanations Packaging Name Specifies the packaging name. No more than 30 characters may be used in this name. Note: The following characte…

100%1 / 344
3.6.2 Packaging Editing
This editor is used to specify part supply related settings for feeders, etc.
Operation Button Explanations
Displays a list of packaging types for the parts used in the production
program which has been opened in the editor.
After a confirmation message, the package data is saved to the library.
Loads package data which is saved in the library.
Clears the specified data.
Item searches display the specified data name. Press the black arrow-mark key to
display a classification list. A search can also be performed by entering the data name
directly from the keyboard. Press the [Scroll Down] key to execute a search in the “top to
bottom” direction.
Part 3 Chapter 3 Editor
Edition 2.0 3-3-36 XP-142E System Reference
Part 3 Chapter 3 Editor
Edition 2.0 3-3-37 XP-142E System Reference
Setting Item Explanations
Packaging Name
Specifies the packaging name. No more than 30 characters may be used in this name.
Note: The following characters may not be used in file names: ( : \ / ; * ? “ < > | ) Also, characters
(˜ .) may not be used at the beginning of the file names.
Packaging Type
Click in this field to display the window shown below. Click the [▼] button at this
window, then select the desired part supply method (packaging type) from the drop-
down list. Specify a “Feed Count” (part feed count) setting.
Tape Width
Specifies the tape width. (0 mm ~ 255 mm)
Feed Pitch
Specifies the tape feed distance. (2 mm ~ 100 mm)
Part 3 Chapter 3 Editor
Edition 2.0 3-3-38 XP-142E System Reference
3.7 Nozzle Editing
(ESR0709d)
This editor is used to edit nozzle assignments.
Operation Button Explanations
Press to perform batch reading of the machine’s nozzle information.
When performing a batch input, verify that all the required
production program nozzles are present.
Setting Item Explanations
No.
Specifies the number of the nozzle station.
Name
Specifies the nozzle name.
Type
Specifies the nozzle type. (Standard: standard nozzles, Custom: special nozzles)
Diameter
Specifies diameter of the nozzle. (unit: mm)