XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第242页

1.9 SIG_TOWER_DELA Y_TIMER _WaitPanelOnDelayTimer 0 ~ 300 O [Explanation] Sets the delay timer (sec) for waiting for a panel. [Default] 0 _WaitNextMcOnDelayTimer 0 ~ 300 O [Explanation] Sets the delay timer (sec) for wai…

1.8 CAMERA_UNIT

_Camera0UnitX X

[Explanation] Sets the camera no. 0 unit value X.

[Default] Proper data measurement result.

_Camera0UnitY X

[Explanation] Sets the camera no. 0 unit value Y.

[Default] Proper data measurement result.

_Camera1UnitX X

[Explanation] Sets the camera no. 1 unit value X.

[Default] Proper data measurement result.

_Camera1UnitY X

[Explanation] Sets the camera no. 1 unit value Y.

[Default] Proper data measurement result.

_Camera1UnitX_Low X

[Explanation] Sets the camera no. 1 unit low poisition value X.

[Default] Proper data measurement result.

_Camera1UnitY_Low X

[Explanation] Sets the camera no. 1 unit low position value Y.

[Default] Proper data measurement result.

_Camera2UnitX X

[Explanation] Sets the camera no. 2 unit value X.

[Default] Proper data measurement result.

_Camera2UnitY X

[Explanation] Sets the camera no. 2 unit value Y.

[Default] Proper data measurement result.

_Camera3UnitX X

[Explanation] Sets the camera no. 3 unit value X.

[Default] Proper data measurement result.

_Camera3UnitY X

[Explanation] Sets the camera no. 3 unit value Y.

[Default] Proper data measurement result.

_Camera4UnitX X

[Explanation] Sets the camera no. 4 unit value X.

[Default] Proper data measurement result.

_Camera4UnitY X

[Explanation] Sets the camera no. 4 unit value Y.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-15 XP-142E System Reference

1.9 SIG_TOWER_DELAY_TIMER

_WaitPanelOnDelayTimer 0 ~ 300 O

[Explanation] Sets the delay timer (sec) for waiting for a panel.

[Default] 0

_WaitNextMcOnDelayTimer 0 ~ 300 O

[Explanation] Sets the delay timer (sec) for waiting for signal from next machine.

[Default] 0

1.10 CYCLE_STEAL

_CycleStealStartTime O

[Explanation] Set the amount of time (in minutes) between cycle steal

measurements.[Default] 5

_CycleStealTerm O

[Explanation] Set the error tolerance for fiducial mark measurement when cycle steal

is carried out.

[Default] 10

_CycleStealDistanceLimit O

[Explanation] This is the tolerance for the difference between the distance obtained

during cycle steal from the center of the fiducial camera to the center of

rotation and the Proper data value [_Camera 1/2 Distance X/Y]. If this

difference exceeds the tolerance, an error stop occurs.

[Default] 100

1.11 AUTO_SETUP

_ASSMCNum –

[Explanation] Not used.

[Default] 0

_MCComPort –

[Explanation] Not used.

[Default] 10000

_PCComPort –

[Explanation] Not used.

[Default] 10000

_ASSFeederChk –

[Explanation] Not used.

[Default] 0

_ASSFeederChkAllSet –

[Explanation] Not used.

[Default] 0

_ASSetupInfoDisp –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-16 XP-142E System Reference

1.12 DEBUG_FLAG

[Explanation] This section is for debugging.

_DebugFlag1 X

_DebugFlag2 X

_DebugFlag3 X

_DebugFlag4 X

_DebugFlag5 X

_DebugFlag6 X

_DebugFlag7 X

_DebugFlag8 X

_DebugFlag9 X

_DebugFlag10 X

_DebugBP X

_DebugDLL X

_DebugBML X

_DebugPartsCheck X

_CStructCheck XR

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-17 XP-142E System Reference