XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第25页

9 10 1 11 12 13 1 9 < WARNING > DISCONNECT POWER PRIOR TO SERVICING. 11 10 Always turn power off before touching inside! TOUJOURS COUPER L'ALIMENTATION AVANT DE TOUCHER A L'INTERUEUR WARNING ATTENTION &lt…

100%1 / 344
4. Safety Labels
(ESG0601a)
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
2
3
4
3
2
1
8
7
6
5
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
3
1
2
5
7
CAUTION
Direct exposure to the lighting unit
may result in damage to the eyes.
Ensure to use protective eyewear
when necessary.
4
6
<
CAUTION
>
DANGER
Be sure to turn off the power
and wait five minutes before
replacing the flash lamp.
The machine may be damaged
if attempting to remove feeders
during operation.
CAUTION
XP1MZ001E
[High Voltage]
[Danger]
8
WARNING
Do not bypass the machine safety
devices. Use of the machine without
the safety covers is prohibited.
Safety Guidelines
Edition 2.0 10 XP-142E System Reference
9
10
1
11
12
13
1
9
< WARNING >
DISCONNECT POWER PRIOR TO SERVICING.
11
10
Always turn power off
before touching inside!
TOUJOURS COUPER L'ALIMENTATION
AVANT DE TOUCHER A L'INTERUEUR
WARNING
ATTENTION
< CAUTION >
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE). USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
13
12
CAUTION
BE SURE TO WEAR THE WRIST STRAP
BEFORE WORKING IN THE CONTROL BOX.
1. TAKE OUT THE WRIST STRAP FROM THE
CONTROL BOX.
2. PUT ON THE WRIST STRAP.
3. START WORK IN THE CONTROL BOX.
XP1MZ002E
[High Voltage]
Safety Guidelines
Edition 2.0 11 XP-142E System Reference
1
1
1
11
14
11
14
Always turn power off
before touching inside!
TOUJOURS COUPER L'ALIMENTATION
AVANT DE TOUCHER A L'INTERUEUR
WARNING
ATTENTION
15
15
The system will not start if a floppy
disk is in the drive when SYSTEM ON
is pressed. Nothing will display
on the monitor when this happens.
<CAUTION>
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE). USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
XP1MZ003E
Front View
Servo Box1
[High Voltage]
Safety Guidelines
Edition 2.0 12 XP-142E System Reference