XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第21页
Safety Guidelines Edition 2.0 7 XP-142E System Reference CAUTION Do not operate the machine after removing or disabling sensors. ● Removing or disabling sensors will disarm the interlock, leading to collisions and damage…
Safety Guidelines
Edition 2.0 6 XP-142E System Reference
Be sure to wear protective glasses.
● Be sure to wear protective glasses.
[Example]
CP-6,7 nozzles use springs which may be propelled during
disassembly. Be sure to handle the nozzles carefully to prevent eye
injuries.
Check the machine monitor and the target axes
while manually operating the machine.
● When operating the machine, carefully follow the instructions that
are displayed at the machine display.
● Operating the machine without looking at the machine display may
lead to operating errors or result in damage to the machine or
products.
Do not touch the servo amp power terminal for at least
five minutes after turning off the power.
● The servo amp retains a high voltage even after the power has
been turned off. Always wait at least five minutes, and ensure that
the CHARGE lamp is off, before undertaking any work that may
result in contact with the servo amp terminal.
WARNING
Safety Guidelines
Edition 2.0 7 XP-142E System Reference
CAUTION
Do not operate the machine after removing or disabling
sensors.
● Removing or disabling sensors will disarm the interlock, leading to
collisions and damage to the machine.
Check the machine display to determine whether
HELPS compatible machines are in the middle of
performing changeover.
● During operation in automatic mode on machines equipped with
automatic changeover equipment, it may be difficult to actually see
automatic changeover taking place from the front of the machine.
When a message appears at the machine display, follow the
instructions that are given.
Ensure to use the handle when opening or closing the
safety doors, fences or covers.
● Opening or closing the safety doors, fences or covers without using
the handle may result in injury to the hand.
● Opening or closing the safety doors, fences or covers with force,
without using the handle may result in damage to the machine.
Safety Guidelines
Edition 2.0 8 XP-142E System Reference
3. Safety Rules for Individual Machine Types
XP-1-series Machines
(ESG0311b)
DANGER
Keep hands clear of the strobe light area and the strobe
light power supply.
● The strobe light and its power supply are high voltage areas.
Inserting hands or tools, etc., into this area could result in electrical
shocks.
Keep hands and other body parts clear of the waste
tape cutter.
● The cutter blade on the waste tape cutter could cause serious
injury.
WARNING
Do not look directly at the strobe light source.
● Be sure to wear protective glasses.
The light source could cause eye damege if looked at directly.
Do not insert hands or other body parts into the
conveyor inlets.
● Body parts may get caught in the machine resulting in injury.
Do not operate the machine when the front/rear cover
has been removed.
● Body parts may get caught in the machine resulting in injury.