XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第301页

Code: 1101F006 Display: When referencing fiducial marks for global / board skip mark sequences, the board no. for the fiducial mark sequence must be 0. Cause: When referencing fiducial marks for global / board skip mark …

Code: 1101E400

Display: The Program polarity item’s [No] setting is not supported.

Cause: XP-series machines do not support Program Polarity”s “No” setting. (Except for

program data transmitted from MCS-S).

Remedy: Set the Program Polarity setting to “Yes”.

Code: 1101E401

Display: The “No” setting for the “Program Polarity” item is not supported for MCS/2

programs received by XP-1-series machines.

Cause: MCS/2 programs received by XP-1-series machines with the “Program Polarity”

item set to “No” may only be used on XP-1-series machines.

Remedy: Set the “Program Polarity” item to “Yes”.

Code: 1101E402

Display: The “No” setting for the “Program Polarity” item is not supported for MCS/2

programs received by XP-2 / XP-3-series machines.

Cause: MCS/2 programs received by XP-2 / XP-3-series machines with the “Program

Polarity” item set to “No” may only be used on XP-1-series machines.

Remedy: Set the “Program Polarity” item to “Yes”.

Code: 1101F001

Display: The total number of board skip mark read sequences and fiducial mark read

sequences exceeds 255.

Cause: The total number of board skip mark read sequences and fiducial mark read

sequences exceeds 255.

Remedy: Correct the sequence data so that the total number of board skip mark read

sequences (Sequence type:B) and fiducial mark read sequences (Sequence type: F)

is 255 or less.

Code: 1101F003

Display: Mark data does not exist for the specified mark name.

Cause: Either the mark name is input incorrectly in the sequence data, or the mark data

does not exist.

Remedy: Check the mark data. If mark data does exist, then check the mark name in the

sequence data.

Code: 1101F004

Display: The mark name is not specified.

Cause: The mark name field in the mark sequence is blank.

Remedy: Specify the mark name to match the existing mark data.

Code: 1101F005

Display: The global skip mark sequence must be positioned earlier in the program than the

board skip mark sequence.

Cause: The global skip mark sequence must be positioned earlier in the program than the

board skip mark sequence.

Remedy: Input the global skip mark sequence at an earlier sequence no. than the board skip

mark sequence.

Part 8 Chapter 1 Error Code Messages and Corrective Measures

Edition 2.0 8-1-12 XP-142E System Reference

Code: 1101F006

Display: When referencing fiducial marks for global / board skip mark sequences, the

board no. for the fiducial mark sequence must be 0.

Cause: When referencing fiducial marks for global / board skip mark sequences, the

board no. for the fiducial mark sequence must be 0.

Remedy: Set the board no. for a fiducial mark sequence to 0 when referencing fiducial

marks for global / board skip mark sequences.

Code: 1101F007

Display: The fiducial mark sequence must be positioned earlier in the program than the

global / board skip mark sequence.

Cause: The fiducial mark sequence must be positioned earlier in the program than the

global / board skip mark sequence.

Remedy: Input the fiducial mark sequence at an earlier sequence no. than the global / board

skip mark sequence.

Code: 1101F008

Display: A board skip mark sequence for a particular board no. must be positioned earlier

in the program than any placement sequences for that board.

Cause: A board skip mark sequence for a particular board no. must be positioned earlier

in the program than any placement sequences for that board.

Remedy: Input the board skip mark sequence for a particular board no. at an earlier

sequence no. than any placement sequences for that board.

Code: 1101F009

Display: The mark name is not specified. The No. 1 mark from the mark edit screen is

being used.

Cause: A mark name has not been specified in the sequence editor screen. The No. 1, type

F mark from the mark editor screen is being used.

Remedy: If there is a problem with the mark being used, then specify a different mark name

in the sequence edit screen.

Code: 11022B00

Display: As the proper data saved at the last shutdown could not be loaded, the data from

the previous shutdown was loaded.

Check the proper data, and re-measure or re-specify the data as necessary.

Cause: As the proper data saved at the last shutdown could not be loaded, the data from

the previous shutdown was loaded.

Remedy: Check the proper data, and re-measure or re-specify the data as necessary.

Code: 1110020B

Display: Production program reading Error

Cause: Production program reading Error.

Remedy: Read a different production program.

Code: 1110020C

Display: No response from MCS.

Cause: No response from MCS.

Remedy: Check MCS machine connections. Check MCS/2 power ON.

Part 8 Chapter 1 Error Codes and Corrective Measures

Edition 2.0 8-1-13 XP-142E System Reference

Code: 1110020D

Display: An unsupported command was received from MCS/2

Cause: An unsupported command was received from MCS/2

Remedy: Take a machine trace and send it to your Fuji representative.

Code: 1110020E

Display: Unable to download program.

Cause: A production program for another machine was downloaded.

Remedy: Check production program machine type. Check the production program for slot

numbers that do not exist on the machine.

Code: 12040114

Display: Parts shortage.

Cause: The recovery limit has been reached.

Remedy: If the machine has stopped due to a lack of parts, supply the parts and continue

production.

If parts have not run out check the pick-up conditions and the condition of the

feeder.

Code: 12050001

Display: Operating System Error

Cause: Operating System Error

Remedy: Internal error. This error should not occur under normal circumstances. Take a