XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第312页

Code: 120501CC Display: Unable to confirm whether the tray retracted. The tray retraction confirmation sensor is broken, or the tray pallet was manually removed. Using the screen that displays once this error is closed, …

Code: 120501C7

Display: The head cannot pass over a tray when ejecting an adjacent tray as the tray height

for the specified slot is too high. Reduce the number of trays.

Cause: The head cannot pass over a tray when ejecting an adjacent tray as the tray height

for the specified slot is too high.

Remedy: Reduce the number of trays.

Code: 120501C8

Display: The nozzle piston is not lowered.

Cause: The reset cylinder raised confirmation sensor (X012) is on.

Remedy: Check that the reset cylinder raised confirmation sensor (X012) is functioning

correctly.

Push the nozzle piston by hand to check that the up/down action is smooth.

Code: 120501C9

Display: The U-axis interlock sensor is blocked.

Cause: Because the U-axis interlock sensor is blocked, the shuttle cannot move.

Remedy: Check that nothing is on top of the tray pallet.

Check that the U-axis interlock sensor is functioning correctly.

Code: 120501CA

Display: Unable to confirm whether the tray advanced The tray advance confirmation

sensor or the tray retract sensor is broken, or the tray pallet may have been

manually removed.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The shuttle should be retaining the tray pallet, however the tray advance

confirmation sensor could not detect the tray pallet.

Remedy: Confirm that both the tray advance confirmation sensor and tray retract sensor are

functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Code: 120501CB

Display: Unable to confirm whether the tray advanced. The tray advance confirmation

sensor, or tray retract sensor is broken or the tray pallet may have been manually

removed.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The tray retract confirmation sensor detected a tray pallet without a record of tray

pallet retention in memory.

Remedy: Confirm that both the tray advance confirmation sensor and tray retract sensor are

functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Part 8 Chapter 1 Error Codes and Corrective Measures

Edition 2.0 8-1-23 XP-142E System Reference

Code: 120501CC

Display: Unable to confirm whether the tray retracted.

The tray retraction confirmation sensor is broken, or the tray pallet was manually

removed.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The shuttle should be retaining the tray pallet, however the tray advance

confirmation sensor could not detect the tray pallet.

Remedy: Check the tray advance confirmation sensor is functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Code: 120501CD

Display: Unable to confirm whether the tray retracted.

The tray retraction confirmation sensor is broken, or the tray pallet was manually

removed.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The shuttle should be retaining the tray pallet, however the tray retract

confirmation sensor could not detect the tray pallet.

Remedy: Check the tray retract confirmation sensor is functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Code: 120501CE

Display: Unable to confirm the tray pallet with the tray store check sensor.

The tray retract confirmation sensor or tray store sensor is broken, or the tray

pallet has been removed manually.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The shuttle should be retaining the tray pallet, however the tray store confirmation

sensor could not detect the tray pallet.

Remedy: Check the tray retract confirmation sensor and tray store check sensor are

functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Code: 120501CF

Display: Unable to confirm the tray pallet with the tray store check sensor.

The tray retract confirmation sensor or tray store sensor is broken, or the tray

pallet has been removed manually.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: The shuttle should not be retaining the tray pallet, however the tray store

confirmation sensor detected the tray pallet.

Remedy: Check the tray retract confirmation sensor and tray store check sensor are

functioning correctly.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Part 8 Chapter 1 Error Code Messages and Corrective Measures

Edition 2.0 8-1-24 XP-142E System Reference

Code: 120501E0

Display: The tape cutter did not arrive at the retract position. (Side *)

Cause: Tape cutter not able to return to retract position.

Remedy: Check hoses and wires, and check for any tape cutter obstacles.

Code: 120501E4

Display: Raised feeder detected. Check the feeder positions.

Cause: The feeder detection sensor was interrupted.

Remedy: Confirm the feeder is set. Check the wiring is correct and that nothing is

interrupting the sensor.

Code: 120501E9

Display: The tape cutter did not arrive at the advanced position. (Side *)

Cause: Tape cutter not able to return to advanced position.

Remedy: Check hoses and wires, and check for any tape cutter obstacles.

Code: 120501EB

Display: The reject parts tray is full.

Cause: The reject parts tray is full.

Remedy: Remove all of the reject parts from the reject parts tray.

Code: 120501ED

Display: Tray ejection failed.

Cause: The tray removal sensor was activated within the set timer limit when the tray was

removed, however the sensor switch remained ON.

Remedy: Check the tray is not stuck in the machine.

Check the tray removal sensor is functioning correctly.

Code: 120501EE

Display: Tray ejection failed.

Cause: The tray removal sensor was not activated within the set timer limit.

Remedy: Manually remove the empty tray from within the machine.

After resuming automatic operation, production will begin with the first part.

Code: 120501EF

Display: The reject parts tray was removed as parts were being rejected.

Cause: The reject parts tray was removed as parts were being rejected.

Remedy: Reset the reject parts tray.

Code: 120501F0

Display: Parts cannot be rejected as the tray is not in position.

Cause: Parts cannot be rejected as the tray is not in position.

Remedy: Reset the reject parts tray.

Code: 120501F1

Display: The reject parts tray has been removed.

Cause: The reject parts tray has been removed.

Remedy: Reset the reject parts tray.

Part 8 Chapter 1 Error Codes and Corrective Measures

Edition 2.0 8-1-25 XP-142E System Reference