XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第264页

1.25 F_Glass_V alue _XMainStDecelPos – [Explanation] Not used. [Default] 0 _YMainStDecelPos – [Explanation] Not used. [Default] 0 _XMainStArrvPos – [Explanation] Not used. [Default] 0 _YMainStArrvPos – [Explanation] Not …

1.23 JIG_POSITION

X_JigPickPos1 X

[Explanation] Sets the XP-142E jig’s (large) X-coordinate pickup position, XP-242E

jig’s X-coordinate pickup position jig’s X-coordinate pickup position.

[Default] Proper data measurement result.

X_JigPickPos2 X

[Explanation] Sets the jig’s (medium) X-coordinate pickup position.

[Default] Proper data measurement result.

X_JigPickPos3 X

[Explanation] Sets the jig’s (small) X-coordinate pickup position.

[Default] Proper data measurement result.

Y_JigPickPos X

[Explanation] Sets the jig’s Y-coordinate pickup position.

[Default] Proper data measurement result.

Z_JigPickPos X

[Explanation] Sets the jig’s Z-coordinate pickup height.

[Default] Proper data measurement result.

1.24 ELEGANCE

_PlaceEleganceQ –

[Explanation] Not used.

[Default] 0

_PlaceUpSpeedRatio 0 ~ 1.00 O

[Explanation] Speed coefficient for UP motion after placement. (Applies only for

Vision Types 100 and 20.)

[Default] 0

_PlaceUpMaxSpeed 0 ~ 1500.0 O

[Explanation] Maximum speed reference for Z-axis speed after part placement.

[Default] 1500

_CycleStealElegance 0.01 ~ 1.00 O

[Explanation] Set the elegance value for the cycle steal after the time set at proper

data item “_CycleStealStartTime” elapses.

[Default] 1

_MainteMaxVRatio 0.01 ~ 1.00 X

[Explanation] Specifies the speed ratio when in maintenance mode.

[Default] 0.1

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-37 XP-142E System Reference

1.25 F_Glass_Value

_XMainStDecelPos –

[Explanation] Not used.

[Default] 0

_YMainStDecelPos –

[Explanation] Not used.

[Default] 0

_XMainStArrvPos –

[Explanation] Not used.

[Default] 0

_YMainStArrvPos –

[Explanation] Not used.

[Default] 0

1.26 TRAY

T_TrayOrg –

[Explanation] Not used.

[Default] 0

T_TrayEmptyOrg –

[Explanation] Not used.

[Default] 0

U_ShuttleBackwardOfst –

[Explanation] Not used.

[Default] 0

U_ShuttleForwardOfst –

[Explanation] Not used.

[Default] 0

U_ShuttleClampPos –

[Explanation] Not used.

[Default] 0

_ShuttleClampOfst –

[Explanation] Not used.

[Default] 0

_ElevatorOfst2 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst3 –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-38 XP-142E System Reference

_ElevatorOfst4 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst5 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst6 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst7 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst8 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst9 –

[Explanation] Not used.

[Default] 0

_ElevatorOfst10 –

[Explanation] Not used.

[Default] 0

_TrayPickUpOfstZ –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-39 XP-142E System Reference