XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第234页

Q_StbTimeFast X [Explanation] Sets the time (msec) for the Q-axis to stabilize when in fast mode. [Default] Proper data measurement result. X_StbTimeSlow X [Explanation] Sets the time (msec) for the X-axis to stabilize w…

1.3 SERVO_OFST

_targetOfst_X XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Y XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Z XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Q XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_R XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_T –

[Explanation] Not used.

[Default] 0

_targetOfst_U –

[Explanation] Not used.

[Default] 0

_targetOfst_F XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_G XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_TestOption –

[Explanation] Not used.

[Default] 0

X_StbTimeFast X

[Explanation] Sets the time (msec) for the X-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

Y_StbTimeFast X

[Explanation] Sets the time (msec) for the Y-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

R_StbTimeFast X

[Explanation] Sets the time (msec) for the R-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-7 XP-142E System Reference

Q_StbTimeFast X

[Explanation] Sets the time (msec) for the Q-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

X_StbTimeSlow X

[Explanation] Sets the time (msec) for the X-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Y_StbTimeSlow X

[Explanation] Sets the time (msec) for the Y-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

R_StbTimeSlow X

[Explanation] Sets the time (msec) for the R-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Q_StbTimeSlow X

[Explanation] Sets the time (msec) for theQ-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-8 XP-142E System Reference

1.4 OPERATION_2

_DoNozzleCleaning 0:1 O

[Explanation] Set whether nozzle cleaning is used or not.

0: Not used

1: Used

[Default] 1

_PolarityConvert 0:1 OR

[Explanation] Specifies the polarity converter start.

0: Start

1: Do not start

Note: Do not set to “0”.

[Default] 1

_DChangeTriger 0:1:2:3 O

[Explanation] Specifies the slot / stage change trigger.

0: Move to the next slot after a parts out or vision processing error.

1, 2: Move to the next slot after a parts out error. Machine stops if

vision processing error occurs.

3: Refers to the Alt. Feeder Trigger setting in part data, to move to

the next slot or stop the machine.

[Default] 0

_ResetNGPartTrayUncondition 0:1 O

[Explanation] Specifies whether or not to confirm opening and closing of the door

after the NG part tray fills up.

0: Confirm

1: Do not confirm

[Default] 0

_NotSimpleOptimize –

[Explanation] Not used.

[Default] 0

_NozzleSufrfaceCheck 0:1 O

[Explanation] Enables/disables the function which checks for foreign matter

adhering to nozzles.

0: Not used

1: Used

[Default] 0

_UseVisionHeightOffset –

[Explanation] Not used.

[Default] 0

_FrontSideShtSpd –

[Explanation] Not used.

[Default] 0

_FrontFrontShtSpd –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-9 XP-142E System Reference