XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第229页

_ConvOutSensor 0:1 X [Explanation] Conveyor-out station sensor specifications 0: Unsupported 1: Supported [Default] 1 _BackupPlateSensor 0:1 X [Explanation] Backup plate interference prevention sensor 0: Not supported 1:…

_ServoPulseReduce 0:1 X

[Explanation] Servo motor frequency setting.

0: Pn201 = 16384

1: Pn201 = 8192

[Default] 0

_DispMode –

[Explanation] Not used.

[Default] 0

_CornerRearSide 0:1:2 XR

[Explanation] Flag for compensation with rear corner pattern referencing. .

0: No corner dog

1: Corner dog (square)

2: Corner dog (round)

[Default] 2

_PanelReverseFlow 0:1:2 X

[Explanation] Panel conveyance direction setting

0: Left to right

1: Right to left (equivalent of function on previous model of FUJI

standard machines)

2: Right to left (equivalent of function on previous model of XP-

machines)

[Default] 0

_RevolverInterLock –

[Explanation] Not used.

[Default] 0

_SmemaFlag 0:1:2 O

[Explanation] Signal transmission format specifications

0: SMEMA specifications (conforms to 1.2)

1: SMEMA specifications (conforms to 1.0)

[Default] 0

_Coplanarity –

[Explanation] Not used.

[Default] 0

_LightingSystem –

[Explanation] Not used.

[Default] 0

_ASSystem –

[Explanation] Not used

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-2 XP-142E System Reference

_ConvOutSensor 0:1 X

[Explanation] Conveyor-out station sensor specifications

0: Unsupported

1: Supported

[Default] 1

_BackupPlateSensor 0:1 X

[Explanation] Backup plate interference prevention sensor

0: Not supported

1: Supported

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-3 XP-142E System Reference

1.2 OPERATION

_BrightLevelArrv –

[Explanation] Not used

[Default] 0

_TrayDetectMotion –

[Explanation] Not used.

[Default] 0

_GateMotionSwitch 0:1:2 O

[Explanation] Placement settings

0: Use sequence data settings

1: Arch motion

2: Gate motion

[Default] 0

_DisposeWaitTime –

[Explanation] Not used.

[Default] 0

_TrayAbsorbTime –

[Explanation] Not used.

[Default] 0

_DisposeConvSide –

[Explanation] Not used.

[Default] 0

_ResetCylORTime –

[Explanation] Not used.

[Default] 0

_PlaceDownEndTimer X

[Explanation] Sets the down limit timer at placing operation (msec).

[Default] 0

_DeviceSetChkUse 0:1:2:3 O

[Explanation] Specifies the part resupply confirmation method.

0: Automatic part resupply

1, 2: Manual part resupply

(Using the machine information screen for parts out or missed pick-

up)

3: Manual part resupply

(Using the machine information screen for parts out, missed pick-up,

or vision processing error)

[Default] 3

_ConvErrTime 0:60000 X

[Explanation] Sets the next stage arrival confirmation timer (msec).

0: 10000 (msec)

The value 1000 is used for all settings below 1000 (msec).

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-4 XP-142E System Reference