XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第236页

_RearSideShtSpd – [Explanation] Not used. [Default] 0 _RearFrontShtSpd – [Explanation] Not used. [Default] 0 _PlacingModeSwitch 0 ~ 2 O [Explanation] Set the double motion changeover at the placement. 0: Single motion 1:…

1.4 OPERATION_2

_DoNozzleCleaning 0:1 O

[Explanation] Set whether nozzle cleaning is used or not.

0: Not used

1: Used

[Default] 1

_PolarityConvert 0:1 OR

[Explanation] Specifies the polarity converter start.

0: Start

1: Do not start

Note: Do not set to “0”.

[Default] 1

_DChangeTriger 0:1:2:3 O

[Explanation] Specifies the slot / stage change trigger.

0: Move to the next slot after a parts out or vision processing error.

1, 2: Move to the next slot after a parts out error. Machine stops if

vision processing error occurs.

3: Refers to the Alt. Feeder Trigger setting in part data, to move to

the next slot or stop the machine.

[Default] 0

_ResetNGPartTrayUncondition 0:1 O

[Explanation] Specifies whether or not to confirm opening and closing of the door

after the NG part tray fills up.

0: Confirm

1: Do not confirm

[Default] 0

_NotSimpleOptimize –

[Explanation] Not used.

[Default] 0

_NozzleSufrfaceCheck 0:1 O

[Explanation] Enables/disables the function which checks for foreign matter

adhering to nozzles.

0: Not used

1: Used

[Default] 0

_UseVisionHeightOffset –

[Explanation] Not used.

[Default] 0

_FrontSideShtSpd –

[Explanation] Not used.

[Default] 0

_FrontFrontShtSpd –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-9 XP-142E System Reference

_RearSideShtSpd –

[Explanation] Not used.

[Default] 0

_RearFrontShtSpd –

[Explanation] Not used.

[Default] 0

_PlacingModeSwitch 0 ~ 2 O

[Explanation] Set the double motion changeover at the placement.

0: Single motion

1: Double motion (Fine Slow & Fine Fast)

2: Double motion (All)

[Default] 0

_JogInterlockOFF 0:1 X

[Explanation] Set whether the jog interlock is used or not.

0: Enabled

1: Disabled

[Default] 0

_PickPosAutoMeasure 0:1:2 O

[Explanation] Set whether automatic placement position measurement is used or not.

0: Disabled

1: Placement position measurement is executed using the commands at

the screen.

2: Placement position measurement is executed automatically during

production, or using the commands at the screen.

[Default] 0

_UseMachineNozzleOnly 0:1 O

[Explanation] Set whether the nozzles loaded on the machine are used in the data

check carried out during operation preparations.

0: Not used

1: Used

[Default] 0

_MiniSigWhiteLighting 0:1 O

[Explanation] Specifies the lighting conditions for the operation display.

0: XP original

1: Fuji standard

[Default] 0

_VcmBreakChkSensor –

[Explanation] Not used.

[Default] 0

_NzlSizeChkFlag –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-10 XP-142E System Reference

_ErrStopBeforeFid 0:1 O

[Explanation] Set whether the machine is stopped before fiducial marks are read, if

an inspection error occurs for parts picked in advance.

0: The machine is not stopped.

1: The machine is stopped.

[Default] 0

_MarkEditWndAutoOpen 0:1 O

[Explanation] Set whether the mark editing screen displays automatically if a fiducial

mark reading error occurs.

0: The screen is not displayed automatically.

1: The screen is displayed automatically.

[Default] 1

_OperationPanelDisp 0:1 O

[Explanation] Set whether operation panel switching is enabled during automatic

operation.

0: Disabled

1: Enabled

[Default] 0

_AutoConvWidth 0:1 O

[Explanation] Enables the conveyor width change function at the start of automatic

operation.

0: OFF

1: ON

[Default] 0

_PlaceUpDelayTimer –

[Explanation] Not used.

[Default] 0

_DisposePosAutoSW 0:1 O

[Explanation] Specifies automatic sorting of NG parts (to the box and tray).

0: Refers to the part data setting

1: Automatic sorting

[Default] 0

_NotFeederPrecedenceAction –

[Explanation] Not used.

[Default] 0

_FMarkReadBeforePickUp 0:1 O

[Explanation] Setting for performing pick-up in advance, while reading fiducial

marks

0: Advance pick-up

1: No advance pick-up

[Default] 0

_LoggingPort 0, 8000 ~ 8999 O

[Explanation] Specifies the UDP communication port number for the production

information log.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-11 XP-142E System Reference