XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第253页

t_spare2 – [Explanation] Not used. [Default] 0 t_CurveNo – [Explanation] Not used. [Default] 0 u_MaxV – [Explanation] Not used. [Default] 0 u_MaxA – [Explanation] Not used. [Default] 0 u_ptpGain – [Explanation] Not used.…

g_P_CON_Start X

[Explanation] Sets the G-axis P_CON start time (msec).

[Default] 6

g_integralGain X

[Explanation] Sets the G-axis integral gain.

[Default] 100

g_AxisValid –

[Explanation] Not used.

[Default] 1

g_spare2 –

[Explanation] Not used.

[Default] 1

g_CurveNo X

[Explanation] G-axis cam curve number.

[Default] 1

t_MaxV –

[Explanation] Not used.

[Default] 0

t_MaxA –

[Explanation] Not used.

[Default] 0

t_ptpGain –

[Explanation] Not used.

[Default] 0

t_stGain –

[Explanation] Not used.

[Default] 0

t_afterGain –

[Explanation] Not used.

[Default] 0

t_P_CON_Start –

[Explanation] Not used.

[Default] 0

t_integralGain –

[Explanation] Not used.

[Default] 0

t_AxisValid –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-26 XP-142E System Reference

t_spare2 –

[Explanation] Not used.

[Default] 0

t_CurveNo –

[Explanation] Not used.

[Default] 0

u_MaxV –

[Explanation] Not used.

[Default] 0

u_MaxA –

[Explanation] Not used.

[Default] 0

u_ptpGain –

[Explanation] Not used.

[Default] 0

u_stGain –

[Explanation] Not used.

[Default] 0

u_afterGain –

[Explanation] Not used.

[Default] 0

u_P_CON_Start –

[Explanation] Not used.

[Default] 0

u_integralGain –

[Explanation] Not used.

[Default] 0

u_AxisValid –

[Explanation] Not used.

[Default] 0

u_spare2 –

[Explanation] Not used.

[Default] 0

u_CurveNo –

[Explanation] Not used.

[Default] 0

x_FeedforwardRatio 0 ~ 100.00 X

[Explanation] Sets the multiplication ratio for feed forward control on the X-axis.