XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第200页

Part 4 Creating T emplates at the Machine (V ision T ype 18) (ESR08AA) This part explains the procedur es for creating vision pr ocessing templates on XP-series machines. 1. Overview . . . . . . . . . . . . . . . . . . .…

Notes:

Part 3 Chapter 4 Expander

Edition 2.0 3-4-4 XP-142E System Reference

Part 4

Creating Templates

at the Machine

(Vision Type 18)

(ESR08AA)

This part explains the procedures for

creating vision processing templates

on XP-series machines.

1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . .4-1-1

2. Creating a Template From Existing Part Data

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2-1

1. Overview

(ESR0801a)

Unlike previous Fuji machines, XP-142E supports only the following Vision types: 10 (rectangular

chip), 18 (general purpose), 20 (small outline transistor), 100 (QFP and connector), 124 (J-lead part),

180 (electrolytic capacitor).

If a vision processing problem occurs with the 10, 20, 100, 124, 180 Vision Types, and if the part is

created again using Vision Type 18, or, if the part data is initially created using Vision Type 18, follow

the procedure given in the following pages to create a vision processing template.

The steps for creating a template are shown below.

1. Editing content is selected.

2. Display image is selected.

3. The editing range is specified.

4. Center offset is specified using calipers.

5. Editing screen is checked.

6. Template is edited.

7. Body size is specified.

8. Camera position is set.

9. Edited data is saved / editing ended.

10. Vision processing test

Part 4 Chapter 1 Overview

Edition 2.0 4-1-1 XP-142E System Reference