XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第262页

1.21 DISPOSE_POSITION X_Disposal1 X [Explanation] Sets the X-coordinate position for discarding small size reject parts in the reject box (mark camera reference). [Default] Proper data measurement result. X_Disposal2 – […

_NzlPosOffsetX4 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY4 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX5 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY5 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX6 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY6 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX7 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY7 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX8 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY8 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX9 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY9 –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-35 XP-142E System Reference

1.21 DISPOSE_POSITION

X_Disposal1 X

[Explanation] Sets the X-coordinate position for discarding small size reject parts in

the reject box (mark camera reference).

[Default] Proper data measurement result.

X_Disposal2 –

[Explanation] Not used.

[Default] 0

Y_Disposal1 X

[Explanation] Sets the Y-coordinate position for discarding small size reject parts in

the reject box (mark camera reference).

[Default] Proper data measurement result.

Y_Disposal2 –

[Explanation] Not used.

[Default] 0

Z_Disposal2 –

[Explanation] Not used.

[Default] 0

1.22 PRISM_POSITION

_PrismFront X

[Explanation] Sets the side 1 camera’s image acquisition position (mm).

[Default] Proper data measurement result.

_PrismBack X

[Explanation] Sets the side 2 camera’s image acquisition position (mm).

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-36 XP-142E System Reference

1.23 JIG_POSITION

X_JigPickPos1 X

[Explanation] Sets the XP-142E jig’s (large) X-coordinate pickup position, XP-242E

jig’s X-coordinate pickup position jig’s X-coordinate pickup position.

[Default] Proper data measurement result.

X_JigPickPos2 X

[Explanation] Sets the jig’s (medium) X-coordinate pickup position.

[Default] Proper data measurement result.

X_JigPickPos3 X

[Explanation] Sets the jig’s (small) X-coordinate pickup position.

[Default] Proper data measurement result.

Y_JigPickPos X

[Explanation] Sets the jig’s Y-coordinate pickup position.

[Default] Proper data measurement result.

Z_JigPickPos X

[Explanation] Sets the jig’s Z-coordinate pickup height.

[Default] Proper data measurement result.

1.24 ELEGANCE

_PlaceEleganceQ –

[Explanation] Not used.

[Default] 0

_PlaceUpSpeedRatio 0 ~ 1.00 O

[Explanation] Speed coefficient for UP motion after placement. (Applies only for

Vision Types 100 and 20.)

[Default] 0

_PlaceUpMaxSpeed 0 ~ 1500.0 O

[Explanation] Maximum speed reference for Z-axis speed after part placement.

[Default] 1500

_CycleStealElegance 0.01 ~ 1.00 O

[Explanation] Set the elegance value for the cycle steal after the time set at proper

data item “_CycleStealStartTime” elapses.

[Default] 1

_MainteMaxVRatio 0.01 ~ 1.00 X

[Explanation] Specifies the speed ratio when in maintenance mode.

[Default] 0.1

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-37 XP-142E System Reference