XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第177页

■ Panel ID List Screen A list of panel IDs which are registered in the data being edited displays at this screen. [Example] • Editing panel ID display The panel ID, code type, and name are displayed. Press the button whe…

• [Code Type] drop-down list

The code type can be selected from the following.

• [Add mark data] button

When this button is pressed, one vacant panel ID data area is added after the final

existing panel ID data being edited.

• [Delete mark] button

Deletes the currently displayed panel ID data. After the deletion, the next mark data

displays.

• [Clear] button

Clears the currently displayed panel ID data. When the editor screen is closed, the

cleared mark data is deleted. (Cleared mark data cannot be saved at the production

program.)

• [Mark File Load] button

Loads panel ID data from the library.

• [Mark File Save] button

Saves the currently displayed panel ID data to the library.

• [Mark Edit Screen] button

Press to switch to the fiducial mark editor screen.

Input value

Type

Auto

Data Matrix

QR Code

XP2S2228E

Part 3 Chapter 3 Editor

Edition 2.0 3-3-21 XP-142E System Reference

■ Panel ID List Screen

A list of panel IDs which are registered in the data being edited displays at this screen.

[Example]

• Editing panel ID display

The panel ID, code type, and name are displayed.

Press the button where editing is desired in order to edit that panel ID at the mark

editor screen.

• [Cancel] button

Closes this screen.

• [Previous page] / [Next Page] buttons

Press to switch display screens. If all the mark data is contained on a single screen,

these buttons do not display.

XP2S2232E

1. LMARK_1

No.

0 Auto

Code type

Panel ID

Code type name

Part 3 Chapter 3 Editor

Edition 2.0 3-3-22 XP-142E System Reference

3.6 Part Editing

(ESR0708h)

The part editor is used to specify part information. There are 3 types of part information:

Part Number, Part Type, Packaging. Part information can be saved to a file in part units.

Operation Button Explanations

PDisplays a list of part numbers used by the production program

which is currently opened in the editor.

After a confirmation message, the part number, part type, and

packaging data in the production program currently being edited are

saved to the program.

Note: Even though this data is saved to the program being edited, it is not

written to the production program file. The data is only saved to the

currently loaded program. The data must therefore be saved to a file

at the “save production program” screen.

After a confirmation message, the part number is saved to the library.

Loads a part number which is saved in the library.

Clears the specified data.

Press to edit a part type data.

Part 3 Chapter 3 Editor

Edition 2.0 3-3-23 XP-142E System Reference