XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第315页

Code: 120501FD Display: The tray height exceeds the maximum allowable height (32 mm). Cause: The tray unit cannot be operated because the tray height exceeds the maximum stack height (32.0 mm). Remedy: Reduce the number …

Code: 120501F2

Display: Strobe radiation error

Cause: The strode did not come on during vision processing.

Remedy: Use the JOG screen to check the strobe is functioning correctly.

If the strobe does not radiate light, replace the Xenon tube.

Code: 120501F3

Display: Raised tape leaf detected. Check the condition of the tape leaf.

Cause: Raised tape leaf detected.

Remedy: Check the tape leaf.

Check the sensor wires and confirm nothing is obstructing the sensor.

Code: 120501F5

Display: The interlock at the tray removal confirmation position was activated. Locate and

remove the object that is triggering the sensor.

Cause: The interlock at the tray removal confirmation position was activated.

Remedy: Locate and remove the object that is triggering the sensor and check the wires.

Code: 120501F6

Display: The empty tray could not be picked up.

Cause: The tray was not picked-up for removal.

Remedy: Move the tray to the tray replacement position and remove the empty tray.

Check remover vacuum pressure.

Check for irregularities at the tray pick-up sensor.

Code: 120501FA

Display: Unable to determine whether the shuttle is retaining the tray.

Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Cause: Unable to determine whether the shuttle is retaining the tray.

Remedy: Using the screen that displays once this error is closed, select whether the shuttle is

retaining the tray.

Code: 120501FB

Display: Unable to advance the shuttle.

Check the shuttle position.

Cause: Although the shuttle is advanced the shuttle origin position confirmation sensor is

ON.

Remedy: Check the position of the shuttle.

Check the shuttle origin position confirmation sensor is functioning correctly.

Code: 120501FC

Display: Unable to retract the shuttle.

Check the shuttle position.

Cause: Although the shuttle is retracted the shuttle origin position confirmation sensor is

not active.

Remedy: Check the position of the shuttle.

Check the shuttle origin position confirmation sensor is functioning correctly.

Part 8 Chapter 1 Error Code Messages and Corrective Measures

Edition 2.0 8-1-26 XP-142E System Reference

Code: 120501FD

Display: The tray height exceeds the maximum allowable height (32 mm).

Cause: The tray unit cannot be operated because the tray height exceeds the maximum

stack height (32.0 mm).

Remedy: Reduce the number of trays.

Code: 120501FF

Display: Tray retract confirmation sensor was unable to confirm tray pallet.

Cause: Attempted to advance the tray pallet to the part pick-up position, but the tray

retract confirmation sensor was unable to confirm the tray pallet.

Remedy: Check that there is a tray pallet in the tray unit. Check the tray retract

confirmation sensor.

Code: 12050205

Display: Panel vacuum error (XP)

Cause: Panel vacuum sensor (X021) was not activated. (XP)

Remedy: Check if the panel is clamped, or if vacuum is activated. (XP)

Code: 12050207

Display: Could not pick-up the nozzle.

Cause: Could not pick-up the nozzle

Remedy: Confirm the Z-axis pick-up position and the vacuum.

Code: 12050208

Display: The nozzle was dropped

Cause: The nozzle confirmation sensor is ON.

Remedy: Confirm the sensor’s is functioning properly, and adjustment position are correct.

Code: 12050209

Display: Air-blow did not take place within the required time.

Cause: Air-blow did not take place within the required time.

Remedy: Check the Air-blow confirmation sensor (X013).

Code: 12050440

Display: The large reject parts box is full.

Cause: The large reject parts box is full.

Remedy: Remove all parts from the large reject parts box.

Code: 12050441

Display: The medium reject parts box is full.

Cause: The medium reject parts box is full.

Remedy: Remove all parts from the medium reject parts box.

Code: 12050442

Display: The large reject parts box was removed while parts were being rejected.

Cause: The large reject parts box was removed while parts were being rejected.

Remedy: Set the large reject parts box inside the machine.

Code: 12050443

Display: The part cannot be rejected as the large reject parts box has been removed.

Cause: The part cannot be rejected as the large reject parts box has been removed.

Remedy: Set the large reject parts box inside the machine.

Part 8 Chapter 1 Error Codes and Corrective Measures

Edition 2.0 8-1-27 XP-142E System Reference

Code: 12050444

Display: The large reject parts box has been removed.

Cause: The large reject parts box has been removed.

Remedy: Set the large reject parts box inside the machine.

Code: 12050445

Display: Unable to read the image.

Cause: Unable to read the image.

Remedy: If this error occurs frequently, a servo or vision processing board may require

replacement.

Code: 12052051

Display: Servo System Error

Cause: Servo System Error

Remedy: Internal error. This error should not occur under normal circumstances. Take a