XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第171页

• [Size A] textbox Enter the Size A dimension in this textbox. (Input range: 0.20 ~ 3.50 mm) • [Size B] textbox Enter the Size B dimension in this textbox. (Input range: 0.20 ~ 3.50 mm) This textbox is disabled when not …

3.5 Mark Editing

(ESR0707c)

This editor is used to measure the various mark types.

The Mark Editor consists of “Fiducial Mark Editor” and “Panel ID (2D Code) Editor”

screens. As the editor items vary according to the mark type, the required items must be

specified. Mark data settings can be saved and read, and registered data can be reused.

Up to 16 mark data can be registered.

3.5.1 Fiducial Mark Editor Screen

The upper part of this screen is the fiducial mark editing area for correcting placing

coordinates, and the lower part is the board skip mark editing area.

• [No.] button

Indicates the fiducial mark number. Press this button to display the fiducial mark list

screen. (Refer to “■ Fiducial Mark Editor Screen”).

Note: This number is used only at the mark editor screen. It is not registered in the

production program.

• [Mark Name] textbox

Enter the mark name in this textbox. (Max. 23 characters)

Note: The following characters cannot be used in the mark name: (:¥/;*?”<>|). Also, a tilde (~)

cannot be used as the first character of the name.

• [Pattern] button

Press to display the shape graphic where the mark shape can be selected.

• [Color] button

Press to select the mark color.

W: white

B: black

Part 3 Chapter 3 Editor

Edition 2.0 3-3-15 XP-142E System Reference

• [Size A] textbox

Enter the Size A dimension in this textbox. (Input range: 0.20 ~ 3.50 mm)

• [Size B] textbox

Enter the Size B dimension in this textbox. (Input range: 0.20 ~ 3.50 mm)

This textbox is disabled when not required for the specified mark pattern.

• [Scan Area]

Enter the area where the camera is to search for the mark.

(Input range: 0.00 ~ 12.50 mm)

• [>>] button

Displays the next mark data specified in the data being edited.

• [<<] button

Displays the previous mark data specified in the data being edited.

• [Add mark data] button

When this button is pressed, one vacant fiducial mark data area is added after the

final existing fiducial mark data.

• [Delete mark] button

Deletes the currently displayed fiducial mark data. After the deletion, the next mark

data displays.

• [Clear] button

Clears the currently displayed fiducial mark data. When the editor screen is closed,

the cleared mark data is deleted. (Cleared mark data cannot be saved at the

production program.)

• [Mark File Load] button

Loads a saved mark file from the library.

• [Mark File Save] button

Saves the currently displayed mark data to the library.

"Scan Area" setting value

XP1S2155E

Part 3 Chapter 3 Editor

Edition 2.0 3-3-16 XP-142E System Reference

• [Mark Name] textbox

Enter the mark name in this textbox. (Max. 23 characters)

Note: The following characters cannot be used in the mark name: (:¥/;*?”<>|). Also, a tilde (~)

cannot be used as the first character of the name.

• [Pattern] button

This button is disabled if the mark is a board skip mark.

• [Color] button

Press to select the mark color.

W: white

B: black

• [Size X] textbox

Enter the Size X dimension in this textbox. (Input range: 1.00 ~ 3.50 mm)

• [Size Y] textbox

Enter the Size Y dimension in this textbox. (Input range: 1.00 ~ 3.50 mm)

• [Clear] button

Clears the currently displayed board skip mark data.

• [Mark File Load] button

Loads a saved mark file from the library.

• [Mark File Save] button

Saves the currently displayed mark data to the library.

• [Edit Panel ID (2D Code) screen] button

Press to switch to the Panel ID (2D code) editor screen.

Part 3 Chapter 3 Editor

Edition 2.0 3-3-17 XP-142E System Reference