XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第203页

2. Creating a T emplate From Existing Part Data (ESR0803d) The procedure for creating a template from existing part data (with Vision Type 18) is explained below. Procedure 1. From the [Production] or the [Program] scree…

Notes:

Part 4 Chapter 1 Overview

Edition 2.0 4-1-2 XP-142E System Reference

2. Creating a Template From Existing Part Data

(ESR0803d)

The procedure for creating a template from existing part data (with Vision Type 18) is explained

below.

Procedure

1. From the [Production] or the [Program] screen, load (read) the production

program which contains the part data to be edited.

2. From the [Main] screen, press [Program], [Editor], [Parts] to display the [Part

Editor] screen.

3. Press the [List] button beside the [Part Number] textbox, then select the desired

part number from the list which displays.

4. Press [Part Type Edit] to display the [Part Type Editor] screen.

5. Use the [Item Search] function at the [Part Type Editor] screen to search for the

desired Vision Type.

6. Press [Vision Type] to display the selectable Vision Types, then select #18.

7. Select [Template] to display the template creation screen.

Part 4 Chapter 2 Creating a Template From Existing Part Data

Edition 2.0 4-2-1 XP-142E System Reference

8. Press [Auto Pick Up] at the top of the screen, then press [START] to pick up the

part from the stage and slot indicated at the upper left of the screen. (This pickup

operation will not occur if no packaging name has been specified.)

Note: The buttons on the template creation screen are explained later.

Part 4 Chapter 2 Creating a Template From Existing Part Data

Edition 2.0 4-2-2 XP-142E System Reference