XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第307页

Code: 12050029 Display: Operating System Error Cause: Operating System Error Remedy: Internal error. This error should not occur under normal circumstances. Take a machine trace and send it to your Fuji representative. C…

100%1 / 344
Code: 12050020
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050021
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050022
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050023
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050024
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050025
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050026
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050027
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050028
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Part 8 Chapter 1 Error Code Messages and Corrective Measures
Edition 2.0 8-1-18 XP-142E System Reference
Code: 12050029
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 1205002A
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 1205002B
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 1205002C
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 1205002D
Display: Operating System Error
Cause: Operating System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050030
Display: Servo System Error
Cause: Servo System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050031
Display: Servo System Error
Cause: Servo System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050032
Display: Servo System Error
Cause: Servo System Error
Remedy: Internal error. This error should not occur under normal circumstances. Take a
machine trace and send it to your Fuji representative.
Code: 12050033
Display: Absolute data cannot be obtained
Cause: Absolute data cannot be obtained.
Remedy: There is a possibility that a servo-related hardware failure has occurred.
Part 8 Chapter 1 Error Codes and Corrective Measures
Edition 2.0 8-1-19 XP-142E System Reference
Code: 120501B2
Display: Reset cylinder movement error.
Cause: The reset cylinder up or down movement has not been confirmed.
Remedy: Check the reset cylinder raised confirmation sensor.
The nozzle piston may be locked.
Push down on the nozzle piston to check its vertical movement.
Code: 120501B3
Display: Backup pin interference sensor activated.
Cause: Backup pin interference sensor activated.
Remedy: Correct the position of the backup pin.
Check the backup pin interference sensor is functioning correctly.
Code: 120501B4
Display: A thermal abnormality has occurred. Check the following item.
Cause: A thermal abnormality was detected.
Remedy: Check the X- and Y-axis regenerative resistance temperature fuse and vacuum
pump temperature fuse functions (XP-141, XP-142). Check the motor thermal
relay for the vacuum pump (XP-141, XP-142).
Code: 120501B6
Display: Limit over (Pick-up position)
Cause: Limit over (Pick-up position).
Remedy: Check the corrected pick-up value and pick-up point offset.
Code: 120501B7
Display: Limit over (Pick-up position)
Cause: Z limit over (Pick-up position)
Remedy: Check the pick-up point offset Z.
Code: 120501B8
Display: An empty tray dropped during tray ejection.
Cause: The tray pick-up sensor switched OFF during tray ejection.
Remedy: Remove the empty tray from the interior of the machine.
Code: 120501B9
Display: The pick-up measurement position exceeds the servo limit.
Cause: The pick-up measurement position exceeds the servo limit.
Remedy: Check that the servo limit specified in the calibration data is correct.
If the servo limit is correct, machine modifications are required to extend the servo
limit, making measurement possible.
For machines that have not been modified, disable this function by setting the
calibration data item “_PickPosAutoMeasure” to “0”.
Code: 120501BA
Display: Unable to advance the shuttle.
An advanced tray already exists.
Confirm the tray pallet position.
Cause: An advanced tray already exists.
The shuttle cannot advance because the tray advance position sensor is OFF.
Remedy: Confirm the tray pallet position.
Check the tray advance position sensor is functioning correctly.
Part 8 Chapter 1 Error Code Messages and Corrective Measures
Edition 2.0 8-1-20 XP-142E System Reference