XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第63页

Nozzle Change Support Mode This mode is restricted to operators who have Maintenance C access permission. 1. At the [Main] screen, select [Production], then [Nozzle Editor] to display the [Nozzle Editor] screen. Select t…

3.5 Nozzle Related Operations

(ESR0220h)

3.5.1 Nozzle Changes

This machine has a function that simplifies nozzle changes.

Procedure

1. At the [Main] screen, select [Manual Operation], then [Move to nozzle change

position] to display the nozzle change position dialog box.

2. Specify the change position (Stage and Slot No.), and push the START button.

3. The head will move to the specified position. The MFU will automatically

unclamp (if the machine does not have fixed devices.)

4. Remove the MFU from the machine.

5. Push the nozzle up, rotate, and remove.

6. Insert the new nozzle and rotate it while pushing up.

7. Return and clamp the MFU to the machine.

XP1T3002Ea

Part 2 Chapter 3 Changeover

Edition 2.0 2-3-8 XP-142E System Reference

Nozzle Change Support Mode

This mode is restricted to operators who have Maintenance C access permission.

1. At the [Main] screen, select [Production], then [Nozzle Editor] to display the

[Nozzle Editor] screen. Select the [Nozzle change support] button.

2. The [Check maintenance key] confirmation dialog box appears, so open the safety

cover and turn the maintenance key ON. Close the error information screen that

appears when the cover is opened.

3. Select one of the 12 nozzles in the [Machine nozzles] area and specify the nozzle

change position (Stage and Slot No.).

4. Select the [Nozzle change support] button.

5. Push and hold the START button. The button must be held down until the servo

motion is complete.

6. The head moves to the nozzle change position, and the specified nozzle is

lowered. Replace the nozzle. To replace another nozzle, select that nozzle in the

[Machine nozzles] area and repeat the process.

7. When finished changing nozzles, select the [Close] button.

Part 2 Chapter 3 Changeover

Edition 2.0 2-3-9 XP-142E System Reference

Part 2 Chapter 3 Changeover

Edition 2.0 2-3-10 XP-142E System Reference

3.5.2 Nozzle Editor

Carry out the settings for the nozzles loaded on the machine.

The Side 1 procedure is explained below, but the procedure is identical for Side 2.

Procedure

1. At the [Main] screen, press [Production] then [Nozzle Editor] to display the

[Nozzle Editor] screen. This screen contains lists of “machine nozzles” and

“program nozzles”. The “machine nozzles” list shows nozzles which are on the

machine, and the “program nozzles” list shows nozzles which the program

requires.

2. Display the nozzle list by pressing the machine nozzle column, and then select the

nozzles to be exchanged. The machine nozzle information is updated along with

the settings for the new nozzles. Or, press [Set all Program nozzles] to change all

to the program nozzles.