XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第22页
Safety Guidelines Edition 2.0 8 XP-142E System Reference 3. Safety Rules for Individual Machine T ypes XP-1-series Machines (ESG0311b) DANGER Keep hands clear of the strobe light area and the strobe light power supply . …
Safety Guidelines
Edition 2.0 7 XP-142E System Reference
CAUTION
Do not operate the machine after removing or disabling
sensors.
● Removing or disabling sensors will disarm the interlock, leading to
collisions and damage to the machine.
Check the machine display to determine whether
HELPS compatible machines are in the middle of
performing changeover.
● During operation in automatic mode on machines equipped with
automatic changeover equipment, it may be difficult to actually see
automatic changeover taking place from the front of the machine.
When a message appears at the machine display, follow the
instructions that are given.
Ensure to use the handle when opening or closing the
safety doors, fences or covers.
● Opening or closing the safety doors, fences or covers without using
the handle may result in injury to the hand.
● Opening or closing the safety doors, fences or covers with force,
without using the handle may result in damage to the machine.
Safety Guidelines
Edition 2.0 8 XP-142E System Reference
3. Safety Rules for Individual Machine Types
XP-1-series Machines
(ESG0311b)
DANGER
Keep hands clear of the strobe light area and the strobe
light power supply.
● The strobe light and its power supply are high voltage areas.
Inserting hands or tools, etc., into this area could result in electrical
shocks.
Keep hands and other body parts clear of the waste
tape cutter.
● The cutter blade on the waste tape cutter could cause serious
injury.
WARNING
Do not look directly at the strobe light source.
● Be sure to wear protective glasses.
The light source could cause eye damege if looked at directly.
Do not insert hands or other body parts into the
conveyor inlets.
● Body parts may get caught in the machine resulting in injury.
Do not operate the machine when the front/rear cover
has been removed.
● Body parts may get caught in the machine resulting in injury.
Safety Guidelines
Edition 2.0 9 XP-142E System Reference
WARNING
Do not disable safety switches and leave safety doors
open.
● Do not operate the machine with the safety switches disabled
(shorted), and the MTU detached. Body parts could become caught
in the machine, resulting in serious injury. After removing the MTU,
be sure to close the safety door.
● Do not short or remove the machine's safety switches. An
operation command could be executed by mistake while the safety
switches are disabled, possibly resulting in serious injury.
Check that nothing lies in the direction of movement
before moving the MFU.
● Incorrect handling may cause injury or damage to personnel or
equipement.
Do not move the MFU by applying a sharp push and
then releasing the handle.
● Careless handling could cause an injury or equipment damage.