XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第246页

T_PlusLimit – [Explanation] Not used. [Default] 0 T_MinusLimit – [Explanation] Not used. [Default] 0 U_PlusLimit – [Explanation] Not used. [Default] 0 U_MinusLimit – [Explanation] Not used. [Default] 0 1.16 JOG_BASE_SPEE…

1.15 SERVO_LIMIT

X_PlusLimit XR

[Explanation] Sets the permissible servo X-axis plus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

X_MinusLimit XR

[Explanation] Sets the permissible servo X-axis minus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] 0

Y_PlusLimit XR

[Explanation] Sets the permissible servo Y-axis plus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

Y_MinusLimit XR

[Explanation] Sets the permissible servo Y-axis minus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] 0

Z_PlusLimit XR

[Explanation] Sets the permissible servo Z-axis plus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

Z_MinusLimit XR

[Explanation] Sets the permissible servo Z-axis minus-direction travel range (mm).

The machine must be restarted in order to register this setting.

[Default] 0

F_PlusLimit XR

[Explanation] Sets the permissible XP-142E servo F-axis plus-direction travel range

(mm). The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

F_MinusLimit XR

[Explanation] Sets the permissible XP-142E servo F-axis minus-direction travel range

(mm). The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

G_PlusLimit XR

[Explanation] Sets the permissible XP-142E servo G-axis plus-direction travel range

(mm). The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

G_MinusLimit XR

[Explanation] Sets the permissible XP-142E servo G-axis minus-direction travel range

(mm). The machine must be restarted in order to register this setting.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-19 XP-142E System Reference

T_PlusLimit –

[Explanation] Not used.

[Default] 0

T_MinusLimit –

[Explanation] Not used.

[Default] 0

U_PlusLimit –

[Explanation] Not used.

[Default] 0

U_MinusLimit –

[Explanation] Not used.

[Default] 0

1.16 JOG_BASE_SPEED

X_jogBaseSpeed X

[Explanation] Minimum X-axis inching speed setting.

[Default] 10000

Y_jogBaseSpeed X

[Explanation] Minimum Y-axis inching speed setting .

[Default] 10000

Z_jogBaseSpeed X

[Explanation] Minimum Z-axis inching speed setting.

[Default] 2000

Q_jogBaseSpeed X

[Explanation] Minimum Q-axis inching speed setting

[Default] 50000

R_jogBaseSpeed X

[Explanation] Minimum R-axis inching speed setting for XP-142E.

[Default] 50000

F_jogBaseSpeed X

[Explanation] Minimum F-axis inching speed setting for XP-142E.

[Default] 10000

G_jogBaseSpeed X

[Explanation] Minimum G-axis inching speed setting for XP-142E.

[Default] 10000

T_jogBaseSpeed –

[Explanation] Not used.

[Default] 10000

U_jogBaseSpeed –

[Explanation] Not used.

[Default] 10000

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-20 XP-142E System Reference

1.17 SERVO_PARAMETER

x_MaxV X

[Explanation] Sets the maximum X-axis speed.

[Default] 16000000

x_MaxA X

[Explanation] Sets the maximum X-axis acceleration.

[Default] 240000000

x_ptpGain X

[Explanation] Sets the gain during X-axis travel.

[Default] 80

x_stGain X

[Explanation] Sets the gain during X-axis positioning.

[Default] 80

x_afterGain X

[Explanation] Sets the gain during X-axis stop.

[Default] 60

x_P_CON_Start X

[Explanation] Sets the X-axis P_CON start time (msec).

[Default] 6

x_integralGain X

[Explanation] Sets the X-axis integral gain.

[Default] 60

x_AxisValid –

[Explanation] Not used.

[Default] 1

x_spare2 –

[Explanation] Not used.

[Default] 1

x_CurveNo X

[Explanation] Specifies the X-axis cam curve number.

[Default] 1

y_MaxV X

[Explanation] Sets the maximum Y-axis speed.

[Default] 25000000

y_MaxA X

[Explanation] Sets the maximum Y-axis acceleration.

[Default] 372000000

y_ptpGain X

[Explanation] Sets the gain during Y-axis travel.

[Default] 130

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-21 XP-142E System Reference