XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第232页

_BlackMaskLevel -1 ~ 255 X [Explanation] Sets the noise eliminating level when vision processing parts. Recognizes brightness levels lower than that specified for part image processing as being the same brightness, and e…

_ConveyerMode 0:1:2 O

[Explanation] Specifies the conveyor mode

0: Same setting as 1.

1: Standard

(Acquire after main conveyor’s panel pass sensor switches on.)

2: Special (Acquire after unloading)

[Default] 1

_ConveyerPassMode 0:1 O

[Explanation] Specifies the conveyor pass mode

0: Normal pass mode (Clamped on main lifter)

1: No clamp mode (Not clamped on main lifter)

[Default] 0

_PickUpTimerSide1 –

[Explanation] Not used

[Default] 0

_PickUpTimerSide2 –

[Explanation] Not used.

[Default] 0

_PickVaccumStartTime –

[Explanation] Not used.

[Default] 0

_VacuumDesTime –

[Explanation] Not used.

[Default] 0

_VT130ImageProcTwice –

[Explanation] Not used.

[Default] 0

_TrayEjectCheck –

[Explanation] Not used.

[Default] 0

_DesStartTime –

[Explanation] Not used.

[Default] 0

_MultiImageNotDisp –

[Explanation] Not used.

[Default] 0

_ConvMtrSpeed X

[Explanation] Sets the panel conveyance speed (mm/sec)

[Default] 340 (“340” is also adopted if the setting is “0”)

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-5 XP-142E System Reference

_BlackMaskLevel -1 ~ 255 X

[Explanation] Sets the noise eliminating level when vision processing parts.

Recognizes brightness levels lower than that specified for part image

processing as being the same brightness, and eliminates noise.

-1: Automatic setting

[Default] -1

_PCFtpUse 0:1 O

[Explanation] Specifies the remote file

0: Disabled

1: Enabled

[Default] 0

_TemplateFind 1:2:3 O

[Explanation] Specifies the conditions for Vision Type 18 template file name search.

0,1: Part No. priority

2: Part type priority

3: Only part type is referenced

Note: Do not set to “0”.

[Default] 3

_MainLifterUpEndTimer O

[Explanation] Sets the waiting period (msec) for lifter UP motion. (Used when image

acquisition occurs before panel clamping is completed.)

[Default] 350

_FiducialLampOnTimer 0 ~ 1000 O

[Explanation] Sets the waiting period (msec) for lamp ON completion. (Used when

image acquisition occurs before the fiducial camera’s brightness has

stabilized.)

[Default] 0

_MainStArrvFDChkFlag –

[Explanation] Not used.

[Default] 0

_ThermalOffsetTime O

[Explanation] Sets the time interval between thermal expansion compensation

measurements when producing one panel. (msec)

Set “0” to disable thermal expansion compensation.

[Default] 0

_ThermalOffsetMark 0:1 O

[Explanation] Specifies the thermal offset reference marks

0: Fiducial marks

1: Position offset marks on the machine

[Default] 0

_NoNzlPosOffset –

[Explanation] Not used.

[Default] 0

_VcmBreakChkTime –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-6 XP-142E System Reference

1.3 SERVO_OFST

_targetOfst_X XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Y XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Z XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_Q XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_R XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_T –

[Explanation] Not used.

[Default] 0

_targetOfst_U –

[Explanation] Not used.

[Default] 0

_targetOfst_F XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_targetOfst_G XR

[Explanation] Absolute encoder offset (mm).

[Default] Proper data measurement result.

_TestOption –

[Explanation] Not used.

[Default] 0

X_StbTimeFast X

[Explanation] Sets the time (msec) for the X-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

Y_StbTimeFast X

[Explanation] Sets the time (msec) for the Y-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

R_StbTimeFast X

[Explanation] Sets the time (msec) for the R-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-7 XP-142E System Reference