XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第7页

Notes: About This Manual Edition 2.0 iv XP-142E System Reference

Body

The information needed to understand the workings of the machine and how to perform

maintenance is explained using text and illustrations.

Page number

A three digit hyphenated number appears in the footer on each page. The first digit of

each page number indicates the part number, the second digit indicates the chapter

number within the part, and the final digit is the sequential page number within that

chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter

of part 1.

Manual name

The name of the manual that appears on the cover is also shown in the footer on each

page.

Edition number

The edition number is updated each time the manual is revised, with the number

reflecting the scale of changes that were made.

Minor revision: Minor changes are reflected in the part of the edition number after

the decimal point, for example, a change from edition 1.0 to 1.1. This

change is made on the revised pages only, and these pages can be

downloaded as required from Fuji's website.

Major revision: If major changes are made, the edition number is increased by one,

for example, a change from edition 1.0 to 2.0. This change is made on

all pages.

Note: The reference numbers at the bottom right of the illustrations are for administrative

purposes only, and are in no way connected to the content of the manual.

Characters that Cannot be Used in Program Names

(Recipe Names)

Do not use the characters listed below in the production program name as they are not

recognized by Windows NT.

• Backslash (\)

• Slash (/)

• Colon (:)

• Semicolon (;)

• Comma (,)

• Asterisk (*)

• Question mark (?)

• Quotation mark (“)

• Less than symbol (<)

• Greater than symbol (>)

• Pipe symbol (|)

• Tilde (see note) (~)

Note: As the tilde (~) mark is used by Windows NT (the machine OS for PCC machines) to

abbreviate long filenames as DOS filenames (eight characters followed by a three-character

extension), some applications may not be able to recognize recipe names with this

character. As a result, it is reccomended not to use the tilde.

About This Manual

Edition 2.0 iii XP-142E System Reference

Notes:

About This Manual

Edition 2.0 iv XP-142E System Reference

Contents – List of Current Pages

Safety Guidelines......................................................(Edition 2.0)

1. About Symbols.......................................................................................1

2. Safety Rules for All Machine Types.......................................................2

3. Safety Rules for Individual Machine Types............................................8

XP-1-series Machines..................................................................................................8

4. Safety Labels.......................................................................................10

5. The EMERGENCY STOP Buttons ......................................................16

Part 1 General

1. Machine Overview.................................................(Edition 2.0) ......1-1-1

1.1 Machine Controls.............................................................................................1-1-1

1.2 Touch Screen ..................................................................................................1-1-3

2. Glossary................................................................(Edition 2.0) ......1-2-1

Part 2 Operation

1. Basic Operation.....................................................(Edition 2.0) ......2-1-1

1.1 Starting Up and Shutting Down the Machine...................................................2-1-1

1.1.1 Starting the Machine and Displaying the [Main] Screen..........................2-1-1

1.1.2 Logging Off (without shutting off the power)............................................2-1-3

1.1.3 Shutting Down .........................................................................................2-1-3

1.2 Stopping the Machine in an Emergency..........................................................2-1-3

1.3 Safety Sensor Test Switch...............................................................................2-1-3

1.4 Stopping the Buzzer ........................................................................................2-1-4

2. Settings Prior to Start Production..........................(Edition 2.0) ......2-2-1

2.1 Operation Settings...........................................................................................2-2-1

2.1.1 Production Mode .....................................................................................2-2-2

2.1.2 Operation Mode.......................................................................................2-2-3

2.1.3 Error Handling .........................................................................................2-2-3

2.1.4 Recovery Limit.......................................................................................2-2-4

2.1.5 Production Quantity.................................................................................2-2-4

2.1.6 Number of Completed Panels .................................................................2-2-4

2.1.7 Elegance Value .......................................................................................2-2-5

2.1.8 Stage Mode (Option) ...............................................................................2-2-6

2.1.9 Tape Cutter..............................................................................................2-2-7

2.1.10 Statistical Information ............................................................................2-2-8

2.1.11 Local Verify (Optional)...........................................................................2-2-9

2.1.12 Other Operation Settings.....................................................................2-2-10

2.2 Signal Tower Settings....................................................................................2-2-11

3. Changeover...........................................................(Edition 2.0) ......2-3-1

3.1 Selecting a Production Program......................................................................2-3-1

3.1.1 Selecting a Production Program From the [Production] Screen..............2-3-1

3.1.2 Selecting a Production Program From the [Program] Screen .................2-3-3

3.1.3 Receiving MCS-2 Programs....................................................................2-3-4

Contents – List of Current Pages

Edition 2.0 v XP-142E System Reference