XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第279页

_PickPosMeasureOfstY2 O [Explanation] Set the difference (mm) between the pick-up compensation value from the mark camera and the actual pick-up compensation value, according to the pick-up position measurement function.…

X_CoplanarityPosX –

[Explanation] Not used.

[Default] 0

Y_CoplanarityPosY –

[Explanation] Not used.

[Default] 0

Z_CoplanarityPosZ –

[Explanation] Not used.

[Default] 0

_CoplaCamShutterSpeed –

[Explanation] Not used.

[Default] 0

_MarkAreaTolerance 0 ~ 10.00 O

[Explanation] Sets the permissible fiducial mark reading range (mm).

Used when the F-mark reading tolerance range is not specified in the

production program.

[Default] 0

_MarkPitchTolerance 0 ~ 10.00 O

[Explanation] Sets the permissible fiducial mark reading pitch (mm).

Used when the F-mark reading tolerance pitch is not specified in the

production program.

[Default] 0

_DesEndDistanceFromDownEnd –

[Explanation] Not used.

[Default] 0

_PickPosMeasureOfstX1 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

_PickPosMeasureOfstY1 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

_PickPosMeasureOfstX2 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-52 XP-142E System Reference

_PickPosMeasureOfstY2 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

_NzlSizeChkSpeed –

[Explanation] Notused.

[Default] 0

_NzlSizeChkLength –

[Explanation] Notused.

[Default] 0

_NzlSizeChkHeight –

[Explanation] Notused.

[Default] 0

_NzlSizeChkDepth –

[Explanation] Notused.

[Default] 0

_NzlSizeChkPosX –

[Explanation] Notused.

[Default] 0

_NzlSizeChkPosY –

[Explanation] Notused.

[Default] 0

_NzlSizeChkPosZ –

[Explanation] Notused.

[Default] 0

_MechaChuckClampTimer –

[Explanation] Notused.

[Default] 0

_MechaChuckUnclampTimer –

[Explanation] Notused.

[Default] 0

_MechaChuckSafeguard –

[Explanation] Notused.

[Default] 0

_MechaChuckMarkDiameter –

[Explanation] Notused.

[Default] 0

_FiducialLampSetting –

[Explanation] Notused.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-53 XP-142E System Reference

_MinimumConveyorWidth 0 ~ 49.99 X

[Explanation] This setting is only for custom machines for panels 50mm or less in the

Y-direction. (Entry is possible only on modified machines.)

[Default] 0

_MaximumPanelSizeX 0 ~ 79.99 O

[Explanation] This is for machines for panels 80mm or less in the X-direction.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-54 XP-142E System Reference