XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第5页

Page Layout Each page indicates the part number, chapter number and title, section title , manual name, page number, and the edition number of the manual. Part number The part number to which each chapter belongs is show…

About This Manual

(ESR0004j)

This manual contains important machine maintenance information for the operator.

The manual content is intended for specialized technicians who are familiar with Surface

Mount Technology (SMT).

Please read this manual carefully in order to ensure safe and efficient machine

maintenance.

Keep this manual close to hand when operating the machine.

Manual Structure

This manual consists of the following nine parts.

Safety Guidelines

Part 1 General

Part 2 Operation

Part 3 On-Machine Programming

Part 4 Creating Templates at the Machine (Vision Type 18)

Part 5 Commands

Part 6 Proper Data

Part 7 I/O Map

Part 8 Errors and Countermeasures

About This Manual

Edition 2.0 i XP-142E System Reference

Page Layout

Each page indicates the part number, chapter number and title, section title , manual

name, page number, and the edition number of the manual.

Part number

The part number to which each chapter belongs is shown on the header on each page.

Chapter number and title

The title of each chapter is shown in the header on each page. Each part may contain one

or more chapters.

Section title

Each chapter may be divided into several sections. The section number is composed of

the number of the chapter to which the section belongs, followed by a sequential number

for each section.

1. Basic Operation

(ESR02AB)

This chapter explains basic procedure of the machine operation. Ensure you are familiar with all the

parts of the machine, which have been described in Part 1, before attempting the procedures

described in this chapter. Most of the explanations start from the [Main] screen shown below.

1.1 Starting Up and Shutting Down the Machine

(ESR0201i)

1.1.1 Starting the Machine and Displaying the [Main] Screen

Although most of the explanations in this chapter start from the [Main] screen, this is not

the first screen that displays when the machine is started. Carry out the following

procedure to start the machine and display the [Main] screen.

Procedure

1. Start the host system connected to the machine.

2. Set the circuit breaker on the machine to the ON position.

3. Push the SYSTEM ON button to start the machine.

The machine boots up and the red [Logon] screen displays.

4. Pressing the [Operator] or [Password] fields displays a keyboard.

5. Using the displayed keyboard, enter the [Operator] (operator name) and

[Password], then press [Logon] to log on.

Part 2 Chapter 1 Basic Operation

Edition 2.0 2-1-1 XP-142E System Reference

Manual name

XP1S0002Ea

Body

Edition number

Page number

Section title

Chapter number and title

Part number

About This Manual

Edition 2.0 ii XP-142E System Reference

Body

The information needed to understand the workings of the machine and how to perform

maintenance is explained using text and illustrations.

Page number

A three digit hyphenated number appears in the footer on each page. The first digit of

each page number indicates the part number, the second digit indicates the chapter

number within the part, and the final digit is the sequential page number within that

chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter

of part 1.

Manual name

The name of the manual that appears on the cover is also shown in the footer on each

page.

Edition number

The edition number is updated each time the manual is revised, with the number

reflecting the scale of changes that were made.

Minor revision: Minor changes are reflected in the part of the edition number after

the decimal point, for example, a change from edition 1.0 to 1.1. This

change is made on the revised pages only, and these pages can be

downloaded as required from Fuji's website.

Major revision: If major changes are made, the edition number is increased by one,

for example, a change from edition 1.0 to 2.0. This change is made on

all pages.

Note: The reference numbers at the bottom right of the illustrations are for administrative

purposes only, and are in no way connected to the content of the manual.

Characters that Cannot be Used in Program Names

(Recipe Names)

Do not use the characters listed below in the production program name as they are not

recognized by Windows NT.

• Backslash (\)

• Slash (/)

• Colon (:)

• Semicolon (;)

• Comma (,)

• Asterisk (*)

• Question mark (?)

• Quotation mark (“)

• Less than symbol (<)

• Greater than symbol (>)

• Pipe symbol (|)

• Tilde (see note) (~)

Note: As the tilde (~) mark is used by Windows NT (the machine OS for PCC machines) to

abbreviate long filenames as DOS filenames (eight characters followed by a three-character

extension), some applications may not be able to recognize recipe names with this

character. As a result, it is reccomended not to use the tilde.

About This Manual

Edition 2.0 iii XP-142E System Reference