XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第23页
Safety Guidelines Edition 2.0 9 XP-142E System Reference W ARNING Do not disable safety switches and leave safety doors open. ● Do not operate the machine with the safety switches disabled (shorted), and the MTU detached…
Safety Guidelines
Edition 2.0 8 XP-142E System Reference
3. Safety Rules for Individual Machine Types
XP-1-series Machines
(ESG0311b)
DANGER
Keep hands clear of the strobe light area and the strobe
light power supply.
● The strobe light and its power supply are high voltage areas.
Inserting hands or tools, etc., into this area could result in electrical
shocks.
Keep hands and other body parts clear of the waste
tape cutter.
● The cutter blade on the waste tape cutter could cause serious
injury.
WARNING
Do not look directly at the strobe light source.
● Be sure to wear protective glasses.
The light source could cause eye damege if looked at directly.
Do not insert hands or other body parts into the
conveyor inlets.
● Body parts may get caught in the machine resulting in injury.
Do not operate the machine when the front/rear cover
has been removed.
● Body parts may get caught in the machine resulting in injury.
Safety Guidelines
Edition 2.0 9 XP-142E System Reference
WARNING
Do not disable safety switches and leave safety doors
open.
● Do not operate the machine with the safety switches disabled
(shorted), and the MTU detached. Body parts could become caught
in the machine, resulting in serious injury. After removing the MTU,
be sure to close the safety door.
● Do not short or remove the machine's safety switches. An
operation command could be executed by mistake while the safety
switches are disabled, possibly resulting in serious injury.
Check that nothing lies in the direction of movement
before moving the MFU.
● Incorrect handling may cause injury or damage to personnel or
equipement.
Do not move the MFU by applying a sharp push and
then releasing the handle.
● Careless handling could cause an injury or equipment damage.
4. Safety Labels
(ESG0601a)
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
2
3
4
3
2
1
8
7
6
5
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
3
1
2
5
7
CAUTION
Direct exposure to the lighting unit
may result in damage to the eyes.
Ensure to use protective eyewear
when necessary.
4
6
<
CAUTION
>
DANGER
Be sure to turn off the power
and wait five minutes before
replacing the flash lamp.
The machine may be damaged
if attempting to remove feeders
during operation.
CAUTION
XP1MZ001E
[High Voltage]
[Danger]
8
WARNING
Do not bypass the machine safety
devices. Use of the machine without
the safety covers is prohibited.
Safety Guidelines
Edition 2.0 10 XP-142E System Reference