XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第245页
1.15 SERVO_LIMIT X_PlusLimit XR [Explanation] Sets the permissible servo X-axis plus-direction travel range (mm). The machine must be restarted in order to register this setting. [Default] Proper data measurement result.…
1.13 CONV_DELAY_TIMER
_InArrvOnDelayTimer O
[Explanation] Set the delay timer for the in-conveyor arrival sensor to come on.
(msec)
[Default] 10
_MainDecOnDelayTimer O
[Explanation] Set the delay timer for the main conveyor deceleration sensor to come
on. (msec)
[Default] 10
_MainArrvOnDelayTimer O
[Explanation] Set the delay timer for the main conveyor arrival sensor to come on.
(msec)
[Default] 10
_MainPassOnDelayTimer O
[Explanation] Set the delay timer for the main conveyor pass through sensor to come
on. (msec)
[Default] 10
_OutPassOnDelayTimer O
[Explanation] Set the delay timer for the out-conveyor pass through sensor to come
on. (msec)
[Default] 10
1.14 TOUCH_PANEL
_TouchPanelType 0:1:2 XR
[Explanation] Touch panel usage setting.
0: Touch panel is not used.
1: EMT0550, AHL-71 is used.
2: IMES7512 is used.
[Default] 1
_TPDblClickSpeed 100 ~ 3000 X
[Explanation] Sets the mouse double-click and identification time (msec).
[Default] 350
_TPDblClickDistance 1 ~ 120 X
[Explanation] Sets the distance between clicks which is recognized as a double-click.
[Default] 30
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-18 XP-142E System Reference
1.15 SERVO_LIMIT
X_PlusLimit XR
[Explanation] Sets the permissible servo X-axis plus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
X_MinusLimit XR
[Explanation] Sets the permissible servo X-axis minus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] 0
Y_PlusLimit XR
[Explanation] Sets the permissible servo Y-axis plus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
Y_MinusLimit XR
[Explanation] Sets the permissible servo Y-axis minus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] 0
Z_PlusLimit XR
[Explanation] Sets the permissible servo Z-axis plus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
Z_MinusLimit XR
[Explanation] Sets the permissible servo Z-axis minus-direction travel range (mm).
The machine must be restarted in order to register this setting.
[Default] 0
F_PlusLimit XR
[Explanation] Sets the permissible XP-142E servo F-axis plus-direction travel range
(mm). The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
F_MinusLimit XR
[Explanation] Sets the permissible XP-142E servo F-axis minus-direction travel range
(mm). The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
G_PlusLimit XR
[Explanation] Sets the permissible XP-142E servo G-axis plus-direction travel range
(mm). The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
G_MinusLimit XR
[Explanation] Sets the permissible XP-142E servo G-axis minus-direction travel range
(mm). The machine must be restarted in order to register this setting.
[Default] Proper data measurement result.
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-19 XP-142E System Reference
T_PlusLimit –
[Explanation] Not used.
[Default] 0
T_MinusLimit –
[Explanation] Not used.
[Default] 0
U_PlusLimit –
[Explanation] Not used.
[Default] 0
U_MinusLimit –
[Explanation] Not used.
[Default] 0
1.16 JOG_BASE_SPEED
X_jogBaseSpeed X
[Explanation] Minimum X-axis inching speed setting.
[Default] 10000
Y_jogBaseSpeed X
[Explanation] Minimum Y-axis inching speed setting .
[Default] 10000
Z_jogBaseSpeed X
[Explanation] Minimum Z-axis inching speed setting.
[Default] 2000
Q_jogBaseSpeed X
[Explanation] Minimum Q-axis inching speed setting
[Default] 50000
R_jogBaseSpeed X
[Explanation] Minimum R-axis inching speed setting for XP-142E.
[Default] 50000
F_jogBaseSpeed X
[Explanation] Minimum F-axis inching speed setting for XP-142E.
[Default] 10000
G_jogBaseSpeed X
[Explanation] Minimum G-axis inching speed setting for XP-142E.
[Default] 10000
T_jogBaseSpeed –
[Explanation] Not used.
[Default] 10000
U_jogBaseSpeed –
[Explanation] Not used.
[Default] 10000
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-20 XP-142E System Reference