XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第214页
■ T emplate Editor Operation Button Explanations Position line display mode Press to display and edit positioning lines. The position line parameters display in the line editor mode. Inspection line display mode Press to…
■ Template Creating Screen Explanations
Operation Button Explanations
Press to select the desired stage when picking up parts or when
manually discarding parts.
Press to select the desired slot when picking up parts or when
manually discarding parts.
Specifies the Vision Type for the selected part.
Press to automatically pick up a part from the specified stage and slot.
Press to manually (by hand) pick up a part from the specified stage and
slot.
Press to open the template wizard.
Press to open the test screen.
Press to automatically discard the picked up part.
Press to manually (by hand) discard the picked up part.
Closes the screen.
Part 4 Chapter 2 Creating a Template From Existing Part Data
Edition 2.0 4-2-11 XP-142E System Reference
■ Template Editor
Operation Button Explanations
Position line display mode
Press to display and edit positioning lines. The position line parameters
display in the line editor mode.
Inspection line display mode
Press to display and edit inspection lines. The inspection line parameters
display in the line editor mode.
As the "Find Set" function cannot be used for inspection lines, the [Find All
Cancel] and [Find Set Mode] buttons are disabled when in the inspection line
display mode.
Line editor mode (Input)
This mode is used for line editing (inputs).
Part 4 Chapter 2 Creating a Template From Existing Part Data
Edition 2.0 4-2-12 XP-142E System Reference
New Inputs
Seek lines which conform to the line parameter settings can be drawn by clicking the
points where seek lines are desired. When the line parameter's [Angle] button is
selected, a perpendicular seek line is generated relative to the edge of the clicked
position. If the clicked position has no edge, no line can be generated. Newly generated
lines are active lines.
Selecting a Line
A seek line can be selected and made active simply by clicking on it. When a line is
selected, that line's information displays at the line parameter dialog box. If one line of a
seek line pair is selected, it becomes the "parent" line.
Moving Lines
Seek lines can be moved by dragging their center areas.
Changing Line Lengths & Angles
Seek line lengths and angles can be changed by dragging the line ends. A line length can
be extended up to the half the length of the editor screen's diagonal line.
Changing Line Parameters
The parameters of an active line can be changed at the line parameters dialog box.
Deleting Lines
1 active line can be deleted by pressing the [Active Delete] button.
Line Editor Mode (input)
This mode is for editing lines (inputs).
Selecting Lines
A selection rectangle can be created by dragging, to select multiple lines within that
rectangle. Lines which extend beyond the rectangle cannot be selected. A single line can
be selected simply by clicking on that line.
If one line of a seek line pair is selected, it becomes the "parent" line. If both are selected,
the one which was selected first becomes the "parent' line. The parameter information
for the first line which was selected displays in the line parameter dialog box.
Moving Lines
Multiple selected lines can be moved by clicking on any one of the selected lines and
dragging it. All the other selected lines move along with it.
Part 4 Chapter 2 Creating a Template From Existing Part Data
Edition 2.0 4-2-13 XP-142E System Reference