XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第235页

1.4 OPERA TION_2 _DoNozzleCleaning 0:1 O [Explanation] Set whether nozzle cleaning is used or not. 0: Not used 1: Used [Default] 1 _PolarityConvert 0:1 OR [Explanation] Specifies the polarity converter start. 0: Start 1:…

Q_StbTimeFast X

[Explanation] Sets the time (msec) for the Q-axis to stabilize when in fast mode.

[Default] Proper data measurement result.

X_StbTimeSlow X

[Explanation] Sets the time (msec) for the X-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Y_StbTimeSlow X

[Explanation] Sets the time (msec) for the Y-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

R_StbTimeSlow X

[Explanation] Sets the time (msec) for the R-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Q_StbTimeSlow X

[Explanation] Sets the time (msec) for theQ-axis to stabilize when in slow mode.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-8 XP-142E System Reference

1.4 OPERATION_2

_DoNozzleCleaning 0:1 O

[Explanation] Set whether nozzle cleaning is used or not.

0: Not used

1: Used

[Default] 1

_PolarityConvert 0:1 OR

[Explanation] Specifies the polarity converter start.

0: Start

1: Do not start

Note: Do not set to “0”.

[Default] 1

_DChangeTriger 0:1:2:3 O

[Explanation] Specifies the slot / stage change trigger.

0: Move to the next slot after a parts out or vision processing error.

1, 2: Move to the next slot after a parts out error. Machine stops if

vision processing error occurs.

3: Refers to the Alt. Feeder Trigger setting in part data, to move to

the next slot or stop the machine.

[Default] 0

_ResetNGPartTrayUncondition 0:1 O

[Explanation] Specifies whether or not to confirm opening and closing of the door

after the NG part tray fills up.

0: Confirm

1: Do not confirm

[Default] 0

_NotSimpleOptimize –

[Explanation] Not used.

[Default] 0

_NozzleSufrfaceCheck 0:1 O

[Explanation] Enables/disables the function which checks for foreign matter

adhering to nozzles.

0: Not used

1: Used

[Default] 0

_UseVisionHeightOffset –

[Explanation] Not used.

[Default] 0

_FrontSideShtSpd –

[Explanation] Not used.

[Default] 0

_FrontFrontShtSpd –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-9 XP-142E System Reference

_RearSideShtSpd –

[Explanation] Not used.

[Default] 0

_RearFrontShtSpd –

[Explanation] Not used.

[Default] 0

_PlacingModeSwitch 0 ~ 2 O

[Explanation] Set the double motion changeover at the placement.

0: Single motion

1: Double motion (Fine Slow & Fine Fast)

2: Double motion (All)

[Default] 0

_JogInterlockOFF 0:1 X

[Explanation] Set whether the jog interlock is used or not.

0: Enabled

1: Disabled

[Default] 0

_PickPosAutoMeasure 0:1:2 O

[Explanation] Set whether automatic placement position measurement is used or not.

0: Disabled

1: Placement position measurement is executed using the commands at

the screen.

2: Placement position measurement is executed automatically during

production, or using the commands at the screen.

[Default] 0

_UseMachineNozzleOnly 0:1 O

[Explanation] Set whether the nozzles loaded on the machine are used in the data

check carried out during operation preparations.

0: Not used

1: Used

[Default] 0

_MiniSigWhiteLighting 0:1 O

[Explanation] Specifies the lighting conditions for the operation display.

0: XP original

1: Fuji standard

[Default] 0

_VcmBreakChkSensor –

[Explanation] Not used.

[Default] 0

_NzlSizeChkFlag –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-10 XP-142E System Reference