XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第277页

1.34 OTHERS X_MeasureFidMark X [Explanation] Sets the “Measure fiducial mark” X-coordinate (mm). [Default] Proper data measurement result. Y_MeasureFidMark X [Explanation] Sets the “Measure fiducial mark” Y-coordinate (m…

_BMLSide2Nzl11 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

_BMLSide2Nzl12 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

_BMLSide2Nzl1B 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

_BMLSide2Nzl4B 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

_BMLSide2Nzl7B 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

_BMLSide2Nzl10B 0 ~ 255.0000 X

[Explanation] Specifies the black mask level for each nozzle.

(This is used only when the proper item “_BlackMaskLevel” is set to -

1.)

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-50 XP-142E System Reference

1.34 OTHERS

X_MeasureFidMark X

[Explanation] Sets the “Measure fiducial mark” X-coordinate (mm).

[Default] Proper data measurement result.

Y_MeasureFidMark X

[Explanation] Sets the “Measure fiducial mark” Y-coordinate (mm).

[Default] Proper data measurement result.

X_MeasureFidMark2 X

[Explanation] Sets the “Measure fiducial mark 2” X-coordinate (mm).

[Default] Proper data measurement result.

Y_MeasureFidMark2 X

[Explanation] Sets the “Measure fiducial mark 2” Y-coordinate (mm).

[Default] Proper data measurement result.

X_MeasureFidMark3 X

[Explanation] Sets the “Measure fiducial mark 3” X-coordinate (mm).

[Default] Proper data measurement result.

Y_MeasureFidMark3 X

[Explanation] Sets the “Measure fiducial mark 3” Y-coordinate (mm).

[Default] Proper data measurement result.

_ConvWidthMtrSpeed X

[Explanation] Sets the conveyor speed (mm/sec).

[Default] Proper data measurement result.

_ConvWidthOffset X

[Explanation] Sets the conveyor width offset at conveyor width adjustment (mm).

[Default] Proper data measurement result.

_ConvWidthMarkDiffX X

[Explanation] Sets the X-direction deviation (toward secondary rail mark) from

reference mark (mm).

[Default] Proper data measurement result.

_ConvMainArrvStopDis 20 or greater value O

[Explanation] Set the distance from the main conveyor arrival sensor to the stopper.

[Default] 20

_DLLRatio –

[Explanation] Sets the automatically measured DLL ratio (if “0”, a setting of “0.63” is

adopted).

[Default] 0

_VT231LLRatio –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-51 XP-142E System Reference

X_CoplanarityPosX –

[Explanation] Not used.

[Default] 0

Y_CoplanarityPosY –

[Explanation] Not used.

[Default] 0

Z_CoplanarityPosZ –

[Explanation] Not used.

[Default] 0

_CoplaCamShutterSpeed –

[Explanation] Not used.

[Default] 0

_MarkAreaTolerance 0 ~ 10.00 O

[Explanation] Sets the permissible fiducial mark reading range (mm).

Used when the F-mark reading tolerance range is not specified in the

production program.

[Default] 0

_MarkPitchTolerance 0 ~ 10.00 O

[Explanation] Sets the permissible fiducial mark reading pitch (mm).

Used when the F-mark reading tolerance pitch is not specified in the

production program.

[Default] 0

_DesEndDistanceFromDownEnd –

[Explanation] Not used.

[Default] 0

_PickPosMeasureOfstX1 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

_PickPosMeasureOfstY1 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

_PickPosMeasureOfstX2 O

[Explanation] Set the difference (mm) between the pick-up compensation value from

the mark camera and the actual pick-up compensation value,

according to the pick-up position measurement function.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-52 XP-142E System Reference