XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第270页
1.31 NOZZLE_TYPE _Nzl1Type – [Explanation] Not used. [Default] 0 _Nzl2Type – [Explanation] Not used. [Default] 0 _Nzl3Type – [Explanation] Not used. [Default] 0 _Nzl4Type – [Explanation] Not used. [Default] 0 _Nzl5Type –…
_GlassCircleDiameter2 –
[Explanation] Not used.
[Default] 0
_GlassCircleDistance2 –
[Explanation] Not used.
[Default] 0
_GlassCentCircleDiameter2 –
[Explanation] Not used.
[Default] 0
_GlassLogicalLevel –
[Explanation] Not used.
[Default] 0
1.30 MATRIX_TABLE
_MtxTblPitch X
[Explanation] Mark pitch (mm)
[Default] 7
_MtxTblX X
[Explanation] X-direction measure quantity
[Default] 65
_MtxTblY X
[Explanation] Y-direction measure quantity
[Default] 45
_MtxTblElegance X
[Explanation] Elegance (acceleration rate) value
[Default] 0.1
_MtxTblWaitTime1 X
[Explanation] The amount of time (msec) the servos wait upon completion of a
movement.
[Default] 30
_MtxTblWaitTime2 X
[Explanation] The amount of time (msec) the lamp waits before lighting.
[Default] 150
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-43 XP-142E System Reference
1.31 NOZZLE_TYPE
_Nzl1Type –
[Explanation] Not used.
[Default] 0
_Nzl2Type –
[Explanation] Not used.
[Default] 0
_Nzl3Type –
[Explanation] Not used.
[Default] 0
_Nzl4Type –
[Explanation] Not used.
[Default] 0
_Nzl5Type –
[Explanation] Not used.
[Default] 0
_Nzl6Type –
[Explanation] Not used.
[Default] 0
_Nzl7Type –
[Explanation] Not used.
[Default] 0
_Nzl8Type –
[Explanation] Not used.
[Default] 0
_Nzl9Type –
[Explanation] Not used.
[Default] 0
_Nzl10Type –
[Explanation] Not used.
[Default] 0
_Nzl11Type –
[Explanation] Not used.
[Default] 0
_Nzl12Type –
[Explanation] Not used.
[Default] 0
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-44 XP-142E System Reference
1.32 PICKUP_NZL_OFFSET
Z_Nzl1PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl2PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl3PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl4PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl5PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl6PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl7PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl8PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl9PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Z_Nzl10PickUpOfst X
[Explanation] Sets the pickup offset Z (mm) for each nozzle used in XP-142E pickups.
[Default] The Proper data measurement result is automatically adopted as the
setting.
Part 6 Chapter 1 Proper Data Measurement
Edition 2.0 6-1-45 XP-142E System Reference