XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第243页

1.12 DEBUG_FLAG [Explanation] This section is for debugging. _DebugFlag1 X _DebugFlag2 X _DebugFlag3 X _DebugFlag4 X _DebugFlag5 X _DebugFlag6 X _DebugFlag7 X _DebugFlag8 X _DebugFlag9 X _DebugFlag10 X _DebugBP X _DebugD…

1.9 SIG_TOWER_DELAY_TIMER

_WaitPanelOnDelayTimer 0 ~ 300 O

[Explanation] Sets the delay timer (sec) for waiting for a panel.

[Default] 0

_WaitNextMcOnDelayTimer 0 ~ 300 O

[Explanation] Sets the delay timer (sec) for waiting for signal from next machine.

[Default] 0

1.10 CYCLE_STEAL

_CycleStealStartTime O

[Explanation] Set the amount of time (in minutes) between cycle steal

measurements.[Default] 5

_CycleStealTerm O

[Explanation] Set the error tolerance for fiducial mark measurement when cycle steal

is carried out.

[Default] 10

_CycleStealDistanceLimit O

[Explanation] This is the tolerance for the difference between the distance obtained

during cycle steal from the center of the fiducial camera to the center of

rotation and the Proper data value [_Camera 1/2 Distance X/Y]. If this

difference exceeds the tolerance, an error stop occurs.

[Default] 100

1.11 AUTO_SETUP

_ASSMCNum –

[Explanation] Not used.

[Default] 0

_MCComPort –

[Explanation] Not used.

[Default] 10000

_PCComPort –

[Explanation] Not used.

[Default] 10000

_ASSFeederChk –

[Explanation] Not used.

[Default] 0

_ASSFeederChkAllSet –

[Explanation] Not used.

[Default] 0

_ASSetupInfoDisp –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-16 XP-142E System Reference

1.12 DEBUG_FLAG

[Explanation] This section is for debugging.

_DebugFlag1 X

_DebugFlag2 X

_DebugFlag3 X

_DebugFlag4 X

_DebugFlag5 X

_DebugFlag6 X

_DebugFlag7 X

_DebugFlag8 X

_DebugFlag9 X

_DebugFlag10 X

_DebugBP X

_DebugDLL X

_DebugBML X

_DebugPartsCheck X

_CStructCheck XR

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-17 XP-142E System Reference

1.13 CONV_DELAY_TIMER

_InArrvOnDelayTimer O

[Explanation] Set the delay timer for the in-conveyor arrival sensor to come on.

(msec)

[Default] 10

_MainDecOnDelayTimer O

[Explanation] Set the delay timer for the main conveyor deceleration sensor to come

on. (msec)

[Default] 10

_MainArrvOnDelayTimer O

[Explanation] Set the delay timer for the main conveyor arrival sensor to come on.

(msec)

[Default] 10

_MainPassOnDelayTimer O

[Explanation] Set the delay timer for the main conveyor pass through sensor to come

on. (msec)

[Default] 10

_OutPassOnDelayTimer O

[Explanation] Set the delay timer for the out-conveyor pass through sensor to come

on. (msec)

[Default] 10

1.14 TOUCH_PANEL

_TouchPanelType 0:1:2 XR

[Explanation] Touch panel usage setting.

0: Touch panel is not used.

1: EMT0550, AHL-71 is used.

2: IMES7512 is used.

[Default] 1

_TPDblClickSpeed 100 ~ 3000 X

[Explanation] Sets the mouse double-click and identification time (msec).

[Default] 350

_TPDblClickDistance 1 ~ 120 X

[Explanation] Sets the distance between clicks which is recognized as a double-click.

[Default] 30

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-18 XP-142E System Reference