XP-142E System Reference-SYS-XP142-2.0E.pdf.pdf - 第259页

G_DownPoint X [Explanation] Sets the G-axis DOWN limit (counter value). [Default] Proper data measurement result. R_Pos1 X [Explanation] Sets the revolver angle when nozzle 1 is at pickup position. [Default] 0 Q_PosPick1…

_DevPitch1 16:20 X

[Explanation] Specifies the device pitch (Stage 1).

16:16 (mm) pitch.

20:20 (mm) pitch

[Default] 16

_DevPitch2 16:20 X

[Explanation] Specifies the device pitch (Stage 2).

16:16 (mm) pitch

20:20 (mm) pitch

[Default] 16

_DevPitch3 –

[Explanation] Not used.

[Default] 0

_DevPitch4 –

[Explanation] Not used.

[Default] 0

X_BoardOrg X

[Explanation] Sets the panel origin X (counter value).

[Default] Proper data measurement result.

Y_BoardOrg X

[Explanation] Panel origin Y (counter value).

[Default] Proper data measurement result.

Z_BoardSurface X

[Explanation] Sets the panel surface height (counter value).

[Default] Proper data measurement result.

X_TableOrg X

[Explanation] Specifies the X-axis counter value at head retract position.

[Default] 5

Y_TableOrg X

[Explanation] Specifies the Y-axis counter value at head retract position.

[Default] 400

F_UpPoint X

[Explanation] Sets the F-axis UP limit (counter value).

[Default] Proper data measurement result.

F_DownPoint X

[Explanation] Sets the F-axis DOWN limit (counter value).

[Default] Proper data measurement result.

G_UpPoint X

[Explanation] Sets the G-axis UP limit (counter value).

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-32 XP-142E System Reference

G_DownPoint X

[Explanation] Sets the G-axis DOWN limit (counter value).

[Default] Proper data measurement result.

R_Pos1 X

[Explanation] Sets the revolver angle when nozzle 1 is at pickup position.

[Default] 0

Q_PosPick1 X

[Explanation] Sets the Q-axis pickup position when nozzle 1 is at pickup position.

[Default] 6.5

Q_PosPlace1 X

[Explanation] Sets the Q-axis placing position when nozzle 1 is at “R_POS1”

position.

[Default] 0

Z_DoubleMotionPoint X

[Explanation] This is the height (mm) where the Z-axis pauses when performing

Z-axis double motion during placement.

[Default] Proper data measurement result.

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-33 XP-142E System Reference

1.20 NOZZLE_POSITION

X_NzlPosX1 –

[Explanation] Not used.

[Default] 0 (This setting is ignored.)

Y_NzlPosY1 –

[Explanation] Not used.

[Default] 0 (This setting is ignored.)

Z_NzlPosZ1 –

[Explanation] Not used.

[Default] 0 (This setting is ignored.)

Z_NzlPosZH X

[Explanation] Sets the maximum height when picking up nozzle.

[Default] Proper data measurement result.

X_RemoverPos –

[Explanation] Not used.

[Default] 0

Y_RemoverPos –

[Explanation] Not used.

[Default] 0

Z_RemoverPos –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX1 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY1 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX2 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY2 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetX3 –

[Explanation] Not used.

[Default] 0

_NzlPosOffsetY3 –

[Explanation] Not used.

[Default] 0

Part 6 Chapter 1 Proper Data Measurement

Edition 2.0 6-1-34 XP-142E System Reference