KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1008页
203 E631023 “ViRecog Error: Some leads are missing. Please examine Visi on data” [Cause] Som e leads are m issing. The s pecified lead m is sing is wrong. The c om ponent’s lead pitch is diff erent. Pick ing posture is n…
202
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631021 “ViRecog Error: The position of the lead tip is illegal. Please
examine the component”
[Cause] The leads are irregular in length.
The lead is too dark.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631022 “ViRecog Error: Lead pitch is wrong. Please examine Vision data”
[Cause] The component’s lead pitch is different.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the lead pitch in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
203
E631023 “ViRecog Error: Some leads are missing. Please examine Vision
data”
[Cause] Some leads are missing.
The specified lead missing is wrong.
The component’s lead pitch is different.
Picking posture is not correct.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the number of leads in the production program.
Please examine the lead missing in the production program.
Please examine the lead pitch in the production program.
Please examine the Pick data in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631024 “ViRecog Error: The number of leads is too large. Please examine
Vision data”
[Cause] There are too many leads.
The specified lead missing is wrong.
The component’s lead pitch is different.
Picking posture is not correct.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the number of leads in the production program.
Please examine the lead missing in the production program.
Please examine the lead pitch in the production program.
Please examine the Pick data in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
204
E631025 “ViRecog Error: Failed to detect leads. Please examine the picking
posture”
[Cause] The picking posture is not correct.
The component is not being picked.
The picked component is different from a component in the Component data.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the Pick data in the Production program.
Please examine the Component data (Vacuum value without component) in the
Production program.
Please examine the Component data in the Production program.
Please examine the Vision data in the Production program.
Please examine the light parameter in the Production program.
Please adjust the light parameter in the Production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631026 “ ViRecog Error: The number of leads is too small. Please examine
Vision data”
[Cause] The leads are too few.
The specified lead missing is wrong.
The component’s lead pitch is different.
Picking posture is not correct.
The picked component is different from a component in the Component data.
The light is either too bright or too dark
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the number of leads in the production program.
Please examine the lead missing in the production program.
Please examine the lead pitch in the production program.
Please examine the Pick data in the production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.