KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1161页

78 E398101 “Error has occurred on driver. |%s| code:%d” [Cause] An er ror of axis tr aveling occur red while warming- up was in operation. ？： A function nam e of an axis driver that was in operation. ？？： A r eturn value …

100%1 / 1361
77
E398001 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E398002 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
E398011 “There is no input character”
[Cause] There was no character when you hit Enter key to define characters.
[Treatment] Please enter characters.
E398012 “Input character has irregularities”
[Cause] The letter strings had irregularities when defining the input.
[Treatment] Please enter proper characters.
E398013 “Input value exceeds predetermined data range. (Data range:%d
- %d)”
[Cause] The value when defining the input exceeded the input range. ?: Input range
[Treatment] Please enter the values that are within the range.
W398021 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
W398022 “Servo is in the free state”
[cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.
W398031 “There is WB on conveyor. Remove the PWB”
[Cause] A PWB was detected on the conveyor.
[Treatment] In order to move the axis, please remove the PWB from the conveyor.
W398041 “MTC power off”
[Cause] The power supply of MTC is off.
[Treatment] Please turn on the power supply of MTS.
W398042 “MTC offline”
[Cause] MTC is not online.
[Treatment] Please make MTS online.
78
E398101 “Error has occurred on driver. |%s| code:%d”
[Cause] An error of axis traveling occurred while warming-up was in operation.
？：
A function name of an axis driver that was in operation.
？？：
A return value from the function of the axis driver that was in operation.
[Treatment] Please contact our technical service dept. for information.
Q398601 “Do you interrupt process?
[Cause] STOP button was pressed while warming-up was in operation.
You are asked if to continue the following process.
[Treatment] “YES” button will abort the warming-up process.
“NO” button will resume the warming-up process.
I398701 “Warm-up is finished. %s:%d”
[Cause] The process was performed till the specified counts or time.
？：
“count” or “time”
？？：
The performed count or time.
[Treatment] Please hit “OK” button and exit the process.
79
E399101 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E399102 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
W399111 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
W399112 “Servo is in the free state”
[Cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.
Q399201 “Do you continue reset I/O?”
[Cause]
？
An error occurred in the safety direction setting (of the objective unit).
？：
The unit that had the error
？？：
The action of the error
[Treatment] “YES” button will resume the safety direction setting.
“NO” button will abort the safety direction setting.
Q399211 “cannot return component of %s. Trash component?”
[Cause] The nozzle could not be returned to ATC since something, such as a component,
is on the nozzle. The nozzle has to be returned in order to return the nozzle to
ATC. However, the original position of the component is not clear. You are asked
if to dispose the component.
[Treatment] “YES” button will dispose the component to the disposal position.
“NO” button will move the head to the waiting position for nozzle removal, and
request for a
manual component removal
I399301 “Remove the component from %s”
[Cause] The nozzle could not be returned to ATC since something, such as a component,
was on the nozzle.
[Treatment] Please remove the component off the head manually.
I399311 “Set online for MTC”
[Cause] Failed to set the safety direction for MTC since MTC was not online.
[Treatment] Please make MTC online.
I399312 “Set online for MTS”
[Cause] MTS was not online.
[Treatment] Please make MTS online.
E500001 “Window create error(%s)”
[Cause] Failed to create a window.