KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第777页

13 − 21 13.3.7 Feeder bank Clean the surf ace of the f eeder bank with dry cloth bef ore mount ing f eeders such a tape f eeder there. Clean the f eeder bank with dry cloth so t hat the f ixing plate B ③ is f ree f rom o…

13 − 20

13.3.6 ATC bracket

① ATC bracket ⑥ ATC OFF sensor

② Slide plate ⑦ ATC ON sensor

③ Nozzle outer support ⑧ ATC no.

④ Air cylinder ⑨ Nozzle

⑤ Speed controller

If chips or dirt remains on the ATC bracket ①, nozzle mounting may fail.

Clean the ATC bracket with gauze or similar material lightly damped with alcohol.

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, cut off the power to the machine before

starting to work.

󰒄

②

④

③

⑤

⑥

⑦

⑧

⑨

⑩

13 − 21

13.3.7 Feeder bank

Clean the surface of the feeder bank with dry cloth before mounting feeders such a

tape feeder there.

Clean the feeder bank with dry cloth so that the fixing plate B ③ is free from

obstacles.

Using a vacuum cleaner, clean the feeder bank if there are chips or some foreign

matters remained on it.

① Feeder bank ⑤ Drive cylinder

② Fixing plate ⑥ Position label

③ Fixing plate B ⑦ Bank mark

④ Lock shaft

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, cut off the power to the machine before

starting to work.

13 − 22

13.3.8 Z slider shaft

Clean the inside of the Z slider shaft with a cotton swab moistened with alcohol from

the botton.

Cotton swab

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, cut off the power to the machine before

starting to work.

13.3.9 CVS (Component Verification System) (Option)

If there is any smudges such as dust on the A-side of a contact when starting the unit,

clean if with cloth damped with alcohol. Such smudges on the A-side might interfere

with the inspection of component.

Figure of CVS viewed from upper side

Contact

A side

Contact