KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第210页
4 – 103 4.7.9 Definition of component feeding angle T able 4.7. 9 shows the definition of "c omponent supply angle-0 deg rees" and ot her component supply angles. Supply ang les of 0 ° and 180 ° and supply ang …
4 – 102
Tomb. This field shows whether a standing chip is detected.
Dim. (Dimensions) This field shows whether to execute the dimensions check.
Copla.(Coplanarity) This field shows whether to execute the coplanarity check.
Verify This field shows whether to execute the verify check. “Yes” is
displayed if the verify check is to be executed. “No” is
displayed if not.
Comp (Component) Represents the level of completion of Component or Pick data
Pick on the applicable component. “OK” indicates that Component
or Pick data is created completely, while “NG” indicates that
such data is not created completely.
Vision
Adhe (Adhesive)
L
An asterisk mark is displayed in the column for the
unavailable functions.
Pattern Name
4 – 103
4.7.9 Definition of component feeding angle
Table 4.7.9 shows the definition of "component supply angle-0 degrees" and other
component supply angles. Supply angles of 0° and 180° and supply angles of 90° and
270° of unpolarized components are assumed to be identical.
Table 4.7.9 Definitions of Component Supply Angles
Component type 0°
°°
° 90°
°°
° 180°
°°
° 270°
°°
°
Square chip
MELF
(Cylindrical component)
Aluminum electrolytic
capacitor
GaAsFET
SOT
SOP
HSOP
SOJ
QFP
QFJ(PLCC)
BQFP(PQFP)
4 – 104
Component type 0°
°°
° 90°
°°
° 180°
°°
° 270°
°°
°
TSOP-1
TSOP-2
BGA
FBGA
Network resistor
Trimmer
Unidirectional lead
connector
Bidirectional lead
connector
Z-lead connector *1
J-lead socket
Gull-wing socket
Socket with bumper *1
*1 This item is applicable to machines other than a KE-2010.